In energy chains or mobile machine parts, test systems in the automotive industry, vehicles and stationary fuel cell systems, For the internal wiring of electrical and electronic components in control cabinets, Where the use of multi-core, shielded motor cables is problematic due to limited space and minimum bending radii, Specially designed for power circuits of frequency converter-operated servo motors, Multi-standard validation reduces the variety of parts and saves costs, Certified for the USA and Canada for export-oriented machine, device and equipment manufacturers, Can also be used outdoors when the temperature range is observed, Wide range of applications, Copper braid to comply with EMC and shield against electromagnetic interference, Fine-wire, bare copper conductor, Core insulation: PVC, fleece wrapping, copper braid, tinned, fleece wrapping, PVC sheath, black (similar to RAL 9005), When used in energy chains: Please observe assembly guidelines Appendix T3, UL-AWM-Style 10107 cRU AWM II A/B FT1, based on 0250 / 0285, UL File No. E63634, EMC compliant, low-adhesion surface, flame retardancy: UL/CSA: VW-1, FT1 IEC/EN: 60332-1-2, oil-resistant according to DIN EN 50290-2-22 (TM54),
| Property | Value |
| Main conductor nominal cross-section: | 16 mm² |
| Outer diameter approx.: | 10.6 mm |
| Sheath color: | black |
| Number of main cores: | 1 |
| Design: | round |
| Material of the core insulation: | Polyvinyl chloride (PVC) |
| Main core marking: | Color |
| Protective conductor: | no |
| Support element: | without |
| Torsion protection: | no |
| Sheath material: | Polyvinyl chloride (PVC) |
| Flame-retardant: | according to EN 60332-1-2 |
| Permissible external cable temperature during assembly/handling: | 0 to 70 °C |
| Permissible Cable external temperature after installation without vibration: | -40 to 70 °C |
| Nominal voltage U0: | 600 kV |
| Nominal voltage U: | 1 kV |
| Oil resistant according to EN 60811-404: | no |
| AWG size main conductor: | 6 |
| Main conductor nominal cross-section (AWG): | 6 kcmil |
| Specification of conductor insulation: | other |
| Specification of sheath material: | other |
| Min. permissible bending radius, flexible use with forced guidance: | 106 mm |
| Min. permissible bending radius, stationary use/fixed installation: | 42.4 mm |
