Fixed installation as well as occasional flexible use without tensile stress with free, not constantly recurring movement, dry or damp rooms, with normal mechanical stress, suitable for torsion applications that are typical in the loop of wind turbines, in energy chains for travel distances of up to 5 m and 0.2 ... 1 million bending cycles, for the following dimensions: 0.5 to 2.5 mm² and 2 to 7 cores, large selection of standardized lengths and individual cuts, very wide range of articles, versions with up to 100 cores, fine-wire stranded wire made of bare copper wires, PVC core insulation LAPP P8/1, cores twisted in layers, sheath: PVC, gray (similar to RAL 7001), reg. no. 7030 for the following dimensions: up to 2.5 mm²: 2 - 65 cores from 4 mm²: 2 - 7 cores from 25 mm²: 2 - 5 cores, flame-retardant according to IEC 60332-1-2, good chemical resistance, oil-resistant according to DIN EN 50290-2-22 (TM54),
| Property | Value |
| Number of cores: | 3 |
| Nominal conductor cross-section: | 6 mm² |
| Sheath color: | gray |
| Outer diameter approx.: | 11.7 mm |
| Conductor class: | Class 5 = fine-wire |
| Stranding element: | no |
| Material of the core insulation: | Polyvinyl chloride (PVC) |
| Core marking: | numbers |
| Protective conductor: | yes |
| Shield over stranding element: | without |
| Shield over stranding: | without |
| Support element: | without |
| Sheath material: | Polyvinyl chloride (PVC) |
| Torsion protection: | no |
| Halogen-free according to EN 60754-1/2: | no |
| Flame-retardant: | according to EN 60332-1-2 |
| Low smoke according to EN 61034-2: | no |
| Cold-resistant according to EN 60811-504+505+506: | yes |
| Oil-resistant according to EN 60811-404: | no |
| Permissible external cable temperature during assembly/handling: | -15 to 70 °C |
| Permissible external cable temperature after assembly without vibration: | -40 to 80 °C |
| Nominal voltage U0: | 300 V |
| Nominal voltage U: | 500 V |
| Shape: | round |
| Min. permissible bending radius, flexible use with forced guidance: | 175.5 mm |
| Min. permissible bending radius, flexible use/free movement: | 117 mm |
| Min. permissible bending radius, stationary use/fixed installation: | 46.8 mm |
