Plant engineering, mechanical engineering, heating and air conditioning technology, power plant technology, event technology, Fixed installation as well as occasional flexible use without tensile stress with free, not constantly recurring movement, Each dimension with nominal/minimum average wall thickness of the outer sheath of 1.8 mm: Applications where reinforced outer sheaths can be advantageous, Suitable for torsion applications that are typical in the loop of wind turbines (WKA), Fine-wire strand made of bare copper wires, PVC core insulation LAPP P8/1, PVC sheath, black (RAL 9005), Based on 0250-1 and HD 627-1 S1, Flame-retardant according to IEC 60332-1-2, UV and weather-resistant according to ISO 4892-2, Ozone-resistant according to EN 50396,
| Property | Value |
| Nominal cross-section of main conductor: | 25 mm² |
| Outer diameter approx.: | 29 mm |
| Sheath colour: | black |
| Number of main cores: | 5 |
| Design: | round |
| Material of core insulation: | Polyvinyl chloride (PVC) |
| Main core marking: | Numbers |
| Protective conductor: | yes |
| Support element: | without |
| Torsion protection: | no |
| Sheath material: | Polyvinyl chloride (PVC) |
| Flame retardant: | in accordance with EN 60332-1-2 |
| Permissible external cable temperature during assembly/handling: | -5 to 70 °C |
| Permissible Cable external temperature after installation without vibration: | -40 to 80 °C |
| Nominal voltage U0: | 0.6 kV |
| Nominal voltage U: | 1 kV |
| Oil resistant according to EN 60811-404: | no |
| Min. permissible bending radius, flexible use/free movement: | 435 mm |
| Min. permissible bending radius, stationary use/fixed installation: | 116 mm |
