Plant engineering, mechanical engineering, heating and air conditioning technology, power plant technology, dry or damp rooms, with normal mechanical stress, fixed installation as well as occasional flexible use without tensile stress with free, not constantly recurring movement, suitable for torsion applications that are typical in the loop of wind turbines (WKA), high-quality alternative to control cables of type YSLY or YY, space-saving due to small cable diameters, high electrical safety due to 4 kV test voltage, good flexibility due to core stranding with short lay length, fine-wire strand made of bare copper wires, PVC core insulation LAPP P8/1, cores stranded in layers, sheath: PVC, grey (similar to RAL 7001), based on IEC 60227-5 and EN 50525-2-51, flame-retardant according to IEC 60332-1-2, good chemical resistance,
| Property | Value |
| Number of cores: | 5 |
| Conductor nominal cross-section: | 10 mm² |
| Sheath color: | grey |
| Outer diameter approx.: | 18.1 mm |
| Conductor class: | Class 5 = fine-wire |
| Stranding element: | no |
| Material of core insulation: | Polyvinyl chloride (PVC) |
| Core marking: | Color |
| Protective conductor: | yes |
| Shield over stranding element: | without |
| Shield over stranding: | without |
| Support element: | without |
| Sheath material: | Polyvinyl chloride (PVC) |
| Torsion protection: | no |
| Halogen-free according to EN 60754-1/2: | no |
| Flame retardant: | according to EN 60332-1-2 |
| Low smoke according to EN 61034-2: | no |
| Cold resistant according to EN 60811-504+505+506: | yes |
| Oil resistant according to EN 60811-404: | no |
| Perm. External cable temperature during assembly/handling: | -5 to 70 °C |
| Permissible external cable temperature after assembly without vibration: | -40 to 80 °C |
| Nominal voltage U0: | 300 V |
| Nominal voltage U: | 500 V |
| Shape: | round |
| Min. permissible bending radius, flexible use/free movement: | 271.5 mm |
| Min. permissible bending radius, stationary use/fixed installation: | 72.4 mm |
