Internal wiring of devices, control cabinet wiring, field wiring, factory wiring, use in the most important global markets possible, reduction of technical documentation effort, simplified warehousing, increased cost-effectiveness in production, works with XL wire end ferrules, insulated, fine-wire strand made of tinned copper wires, wire insulation based on special PVC, type certifications: H07V-K according to EN 50525-2-31, UL AWM style 1015 (by UL according to UL standard UL 758, UL AWM file number of UI Lapp GmbH: E63634), (UL) MTW (by UL according to UL standard UL 1063, (UL) MTW file number of UI Lapp GmbH: E198296), CSA TEW (, multi-standard cables are available in metric nominal cross-sections in mm² or AWG/kcmil nominal sizes. The leading cross-section is given in the table below, the corresponding cross-section of the other system is from catalog appendix table T16, flame-retardant according to IEC 60332-1-2, flame-retardant according to UL VW1 / CSA FT1, oil-resistant,
| Property | Value |
| Number of cores: | 1 |
| Nominal conductor cross-section: | 0.75 mm² |
| Core color: | blue |
| Outer diameter approx.: | 2.9 mm |
| Core marking: | Color |
| Core insulation material: | Polyvinyl chloride (PVC) |
| Sheath color: | without |
| Sheath material: | without |
| Protective conductor: | no |
| Nominal voltage U0: | 450 V |
| Nominal voltage U: | 750 V |
| Conductor material: | copper |
| Conductor class: | Kl.5 = fine-stranded |
| Perm. max. conductor temperature: | 70 °C |
| Shield: | no |
| Drain wire: | no |
| Protective cover: | without |
| Reinforcement/armoring: | without |
| Halogen-free according to EN 60754-1/2: | no |
| Flame-retardant: | according to EN 60332-1-2 |
| Low smoke according to EN 61034-2: | no |
| Cold-resistant according to EN 60811-504+505+506: | yes |
| Oil-resistant according to EN 60811-404: | no |
| Insulation integrity: | no |
| Permissible external cable temperature during assembly/handling: | 5 to 70 °C |
| Permissible Cable external temperature after installation without vibration: | -40 to 70 °C |
| Conductor surface: | tinned |
| AWG size: | 20 |
| Min. permissible bending radius, stationary use/permanently installed: | 11.6 mm |
