Product family advantages: Fully programmable via software (DALI interface). Flexible current setting (LEDset2). Service life: up to 100,000 h (at Tc = 65 °C, max. 10% failure rate). High-quality dimming of 1100% through amplitude dimming (80 W versions excluded). High light quality thanks to <1% output ripple current. Very high efficiency. Very low standby power consumption: < 0.15 W *. Meets safety requirements through overload, overtemperature and hot plug protection. Easy to use in corridors and toilet rooms thanks to the three-stage corridor function. Touch DIM© application: Simple control via button or sensor. Energy-efficient Touch DIM© operation through automatic switch-off when there is sufficient residual light. Suitable for emergency lighting installations (acc. to EN 60598-2-22 and IEC 61347-2-13, Annex J) thanks to DC detection (0 Hz, pulsating DC), can be switched on/off. Feedback on power consumption and operating hours (Fit for SMART GRID). Suitable for buildings according to EPBD/BREEAM/LEED thanks to automatic Constant Lumen Output setting. Luminaire information for easy maintenance. Product family properties: Mains frequency: 0 Hz, 50 Hz, 60 Hz. Versatile DALI wide-range driver up to 80 W thanks to flexible output characteristics. Supply voltage: 220240 V. Available with output current range: up to 2,100 mA. Constant lumen flux tracking. Integrated adjustable thermal management (Driver Guard). DALI-2 validated (part -101, -102 and -207). Areas of application: Linear lighting solutions for offices, educational institutions, storage areas and retail. Installation in emergency lighting systems in accordance with IEC 61347-2-13, Annex J. Suitable for luminaires of protection class I.
| Property | Value |
| Protection class (IP): | IP20 |
| Output voltage: | 54 to 240 V |
| Protection class: | I |
| Length: | 280.00 mm |
| Width: | 30.00 mm |
| Height: | 21.00 mm |
| Design: | dynamic |
| Housing: | metal housing |
| Suitable for outdoor use: | no |
| Suitable for Constant voltage: | no |
| Suitable for constant current: | yes |
| Suitable for direct voltage (primary side): | yes |
| Dimming 0-10 V: | no |
| Dimming 1-10 V: | no |
| Dimming DALI: | yes |
| Dimming DSI: | no |
| Dimming DMX: | no |
| Dimming potentiometer (integrated in device): | no |
| Dimming LineSwitch: | no |
| Dimming manufacturer-specific: | yes |
| Dimming mains voltage modulation: | no |
| Dimming trailing edge: | no |
| Dimming leading edge: | no |
| Dimming programmable: | yes |
| Dimming RF: | no |
| Dimming Sine Wave Reduction: | no |
| Dimming Touch and Dim: | yes |
| Dimming Zigbee: | no |
| Dimming with Push button: | yes |
| Without dimming function: | no |
