Robust IP44 luminaires with direct light emission, integrated driver and integrated emergency lighting function. Product features: Validated according to European standards (EN 60598-1:2015, EN 60598-2-22:2014). Luminaire suitable for general lighting and emergency lighting. Self-contained luminaires. Emergency lighting function: battery discharge time 3 h. Emergency lighting function test: automatic (AT). Battery technology: LiFePO4. Ambient temperature range during operation: 5+40 C. Surface-mounted luminaire with direct light emission. Protection class: IP44. Shock resistance: IK08. Available in 2 different lengths: 1200 mm and 1500 mm. High light output: up to 115 lm/W. Product benefits: Seamless integration of luminaires with emergency lighting function into the general lighting. Easy wiring thanks to the included pre-wired driver and battery for the emergency lighting function. Easy testing of the emergency lighting function using the integrated automatic test function. Convenient visualization of the results of the automatic test with the included control LED. Operation of the emergency lighting function with a long-lasting LiFePO4 battery with a 3h operating discharge time. High light output in normal operation. 3-year guarantee. Low maintenance and low operating costs. Cable entry on the back of the luminaire and on the end caps for easy electrical connection. Simple and quick installation. Low-flicker light thanks to special electronic ballast. Areas of application: Emergency lighting for escape routes. Anti-panic lighting. Buildings that require 3h emergency lighting. Efficient replacement for traditional T8 and T5 light bars. General lighting in wet or damp and dusty facilities and warehouses. Public buildings. Corridors, stairwells. Technical equipment: Accessories for suspension available. Including mounting screws and dowels.
Property | Value |
Max. System power: | 36.00 W |
Rated luminous flux according to IEC 62722-2-1: | 4000 lm |
Length: | 1199.00 mm |
Width: | 145.00 mm |
Height/depth: | 64.50 mm |
Protection class (IP): | IP44 |
Protection class: | I |
Luminaire with limited surface temperature 'D-mark': | no |
Nominal voltage: | 220 to 240 V |
Housing color: | white |
Housing material: | stainless steel |
Color temperature: | 4000 K |
Impact resistance: | IK08 |
Color rendering index CRI: | 80-89 |
Suitable for ceiling mounting: | yes |
Voltage type: | AC |
With motion detector: | no |
With light source: | yes |
Light source: | LED not replaceable |
Rated ambient temperature according to IEC62722-2-1: | 5 to 40 °C |
Connection type: | Plug-in terminal |
With operating device: | yes |
Cover material: | Opal plastic |
Light distributor: | Diffuser lens/optics/panel |
Without dimming function: | yes |
Light emission: | direct |
With light sensor: | no |
Operating device: | EVG |
Suitable for Recessed installation: | no |
Light color: | white |
Suitable for computer workstations in accordance with EN 12464-1: | no |
Suitable for strip light configuration: | no |
Suitable for pendant suspension: | yes |
Suitable for surface mounting: | yes |
Suitable for emergency lighting: | yes |
Design of the grid: | matt |
Covering of the luminaire with thermal insulation material possible: | no |
DMX dimming: | no |
Dimming DSI: | no |
With air slots: | no |
Dimming LineSwitch: | no |
Dimming potentiometer (integrated in device): | no |
Dimming 0-10 V: | no |
Dimming 1-10 V: | no |
Dimming manufacturer-specific: | no |
Dimming DALI: | no |
Dimming mains voltage modulation: | no |
Dimming trailing edge phase control: | no |
Dimming leading edge phase control: | no |
Dimming programmable: | no |
Dimming RF: | no |
Dimming Sine Wave Reduction: | no |
Dimming Touch and Dim: | no |
Dimming Zigbee: | no |
Dimming with push button: | no |
Rated service life L70/B50 at 25 °C: | 60000 h |
Glow wire test according to IEC 60695-2-11: | 650 °C - 30 s |
Luminaire luminous efficacy: | 100 lm/W |
Power factor: | 0.90 |
Type of wiring: | with through wiring |
Number of poles: | 4 |