Floodlight with daylight sensor, 65 W power consumption. Product features: Daylight sensor integrated into the glass cover. Switches on below 35 lux, switches off above 95 lux illuminance. Reflector-based, symmetrical light distribution with 100° x 100° beam angle. Integrated ballast with large input voltage range, suitable for 100 - 277 V AC. Overvoltage protection: up to 6 kV (L/N-PE), 4 kV (LN). Mounting bracket with 30° angle and large rotation range. Climate membrane for optimized air exchange, with a consistently high IP protection level. Pre-installed, flexible cable (H05RN-F) with a length of 1 m, 3 x 1.0 mm² crimped. Product advantages: Bright, robust and durable. Automatic switching on and off depending on the daylight. Continuous operation possible, activation using a special switching scheme. Safe and very even illumination thanks to the opal, hardened glass diffuser. No light leakage in the upper half space (ULOR 0%) at 0° inclination. Energy savings of up to 90% compared to halogen lamp floodlights. 5-year guarantee. Areas of application: Replacement for floodlights with halogen lamps. Outdoor use (IP65). Industry. Public spaces. Construction sites. Illumination of facades.
| Property | Value |
| Max. System power: | 65.00 W |
| Rated luminous flux according to IEC 62722-2-1: | 8000 lm |
| Housing color: | black |
| Housing material: | aluminum |
| Protection class (IP): | IP65 |
| Socket: | without |
| Light source: | LED not replaceable |
| Protection class: | I |
| With light source: | yes |
| With control gear: | yes |
| Suitable for recessed mounting: | no |
| Length: | 268.00 mm |
| Width: | 237.00 mm |
| Height/depth: | 49.00 mm |
| With motion detector: | no |
| Color temperature: | 4000 K |
| Nominal voltage: | 100 to 277 V |
| Color rendering index CRI: | 80-89 |
| Suitable for ceiling mounting: | no |
| Light distribution: | symmetrical |
| Operating device: | EVG |
| Impact resistance: | IK08 |
| Luminaire with limited surface temperature 'D-mark': | no |
| Reflector: | matt |
| Luminous flux: | 8000 lm |
| Covering of the luminaire with thermal insulation material possible: | no |
| Voltage type: | AC |
| Light color: | white |
| Suitable for track mounting: | no |
| Adjustability: | pivotable |
| Suitable for clamp mounting: | no |
| Suitable for pendulum suspension: | no |
| Suitable for platform/floor mounting: | yes |
| Suitable for truss mounting: | no |
| With light sensor: | yes |
| Suitable for surface mounting: | yes |
| Suitable for cable system: | no |
| Surface: | powder-coated |
| Surface brushed: | no |
| Dimming 0-10 V: | no |
| Dimming 1-10 V: | no |
| Dimming DALI: | no |
| Dimming DMX: | no |
| Dimming DSI: | no |
| Dimming Potentiometer (device-integrated): | no |
| Dimming LineSwitch: | no |
| Dimming manufacturer-specific: | no |
| Dimming Mains voltage modulation: | no |
| Dimming trailing edge: | no |
| Dimming leading edge: | no |
| Dimming programmable: | no |
| Dimming RF: | no |
| Dimming Sine Wave Reduction: | no |
| Dimming Touch and Dim: | no |
| Dimming Zigbee: | no |
| Dimming with push button: | no |
| Without dimming function: | yes |
| Light distributor: | Reflector |
| Light emission: | direct |
| Rated service life L70/B50 at 25 °C: | 70000 h |
| Rated ambient temperature according to IEC62722-2-1: | -30 to 50 °C |
| Type of wiring: | Termination |
| Power factor: | 0.90 |
| Number of poles: | 3 |
| Connection type: | Plug-in terminal |
| Luminaire luminous efficacy: | 125 lm/W |
| Suitable for computer workstations according to EN 12464-1: | no |
| Glow wire test according to IEC 60695-2-11: | 650 °C - 30 s |
| Photobiological safety according to EN 62471: | RG1 |
| Colour consistency (McAdam ellipse): | SDCM5 |
