Square recessed luminaires with IndiviLED© optics, self-contained emergency luminaires, 600 mm. Product features: Each LED with individual lens and reflector for UGR <,16 and homogeneous light distribution. Luminaire suitable for general lighting and emergency lighting. Validated according to European standards (EN 60598-1:2015, EN 60598-2-22:2014). Self-contained luminaires. Emergency lighting function: battery discharge time 3 h. Emergency lighting function test: automatic (AT). Battery technology: LiFePO4. Metal housing, lenses and reflectors made of polycarbonate (PC). Luminous efficacy: up to 120 lm/W. Initial colour consistency: <, 4 SDCM (threshold unit). Glow wire test according to IEC 60695-2-12: 850 °C. Product advantages: Homogeneous light distribution and reduced glare thanks to the IndiviLED© optics. Seamless integration of luminaires with emergency lighting function into the general lighting. Simple wiring thanks to the included, pre-wired driver and battery for the emergency lighting function. Easy testing of the emergency lighting function thanks to the integrated automatic test function. Convenient visualization of the results of the automatic test with the included control LED. Operation of the emergency lighting function with a long-lasting LiFePO4 battery with 3h operating discharge time. Up to 50% energy savings (compared to luminaires that use fluorescent lamps). Robust housing with IK08. Low-flicker light thanks to special electronic ballast. 3-year guarantee. Areas of application: Direct replacement for luminaires with fluorescent lamps. Emergency lighting for escape routes. Anti-panic lighting. Buildings that require 3h emergency lighting. Reception areas, entrance areas, corridors, elevators. Office rooms, conference rooms. Suitable for ceiling recessed systems with a grid size of 600 x 600 mm. Technical equipment: Optional mounting clips available. Safety cable for lights included. External ballast included. Status indicator LED with holder for ceiling recessed installation included.
Property | Value |
Max. System power: | 33.00 W |
Rated luminous flux according to IEC 62722-2-1: | 4000 lm |
Length: | 595.00 mm |
Width: | 595.00 mm |
Height/depth: | 13.00 mm |
Protection class (IP): | IP40 |
Protection class: | II |
Luminaire with limited surface temperature 'D-mark': | no |
Nominal voltage: | 220 to 240 V |
Housing color: | white |
Housing material: | steel |
Color temperature: | 4000 K |
Impact resistance: | IK08 |
Color rendering index CRI: | 80-89 |
Suitable for ceiling mounting: | yes |
Voltage type: | AC |
With motion detector: | no |
Beam angle: | wide beam 41-80° |
With light source: | yes |
Light source: | LED not replaceable |
Rated ambient temperature according to IEC62722-2-1: | 5 to 40 °C |
Connection type: | Screw terminal |
With control gear: | yes |
Cover material: | Opal plastic |
Light distributor: | Focus lens |
Installation height/depth: | 50.0 mm |
Without dimming function: | yes |
Installation width: | 575 mm |
Light emission: | direct |
With light sensor: | no |
Operating device: | EVG |
Suitable for recessed mounting: | yes |
Light color: | white |
Suitable for computer workstations in accordance with EN 12464-1: | yes |
Suitable for light strip configuration: | no |
Suitable for pendant suspension: | yes |
Suitable for surface mounting: | yes |
Suitable for emergency lighting: | yes |
Installation length: | 575 mm |
Grid design: | matt |
Covering of the light with thermal insulation material possible: | no |
DMX dimming: | no |
DSI dimming: | no |
With air slots: | no |
LineSwitch dimming: | no |
Potentiometer dimming (integrated in the device): | no |
0-10 V dimming: | no |
Dimming 1-10 V: | no |
Manufacturer-specific dimming: | no |
DALI dimming: | no |
Mains voltage modulation dimming: | no |
Trailing edge dimming: | no |
Phase control dimming: | no |
Programmable dimming: | no |
RF dimming: | no |
Sine wave reduction dimming: | no |
Touch and dim dimming: | no |
Dimming Zigbee: | no |
Dimming with push button: | no |
Rated service life L70/B50 at 25 °C: | 80000 h |
Glow wire test according to IEC 60695-2-11: | 850 °C - 30 s |
Luminaire luminous efficacy: | 120 lm/W |
Power factor: | 0.90 |
Wiring type: | Termination |
Number of poles: | 2 |