Dimmable electronic ballast 1.10 V for KLL. Product features: Control via 1.10 V interface. Supply voltage: 220.240 V. Mains frequency: 0 Hz, 50 Hz, 60 Hz. Mains voltage: 198.264 V. Dimming range: 3,100% luminous flux. Lamp start: within 0.6 s. Service life: > 100,000 h (at T = 65 °C at Tc). Automatic safety shutdown in the event of a lamp defect or at the end of the lamp's life (EoL T.2). Energy efficiency index EEI: A1 BAT. Overtemperature protection through thermal management at high tc temperatures. Safety: in accordance with EN 61347-2-3. Lamp operation: according to EN 60929. Radio interference suppression: according to EN 55015:2006+A1:2007+A2:2009/CISPR 15. Mains current harmonics according to EN 61000-3-2. Immunity, interference resistance according to EN 61547. Product advantages: Same luminous flux for direct and alternating voltage. Perfect lamp warm start for applications with motion detectors. Dimming of amalgam lamps without flickering or shortening of service life. Maximum efficiency thanks to cut-off technology. Automatic restart after lamp replacement. Ballasts meet MINERGIE standard thanks to very low standby consumption. Configurable emergency power properties. Control via 1.10 V interface. Areas of application: Suitable for use in emergency lighting systems in accordance with EN 50172 / DIN0108-100. Industry. Open-plan offices, corridors or storage rooms. Public buildings. Suitable for luminaires of protection class I.
| Property | Value |
| Suitable for lamp power: | 18 to 57 W |
| Length: | 123.00 mm |
| Width: | 79.00 mm |
| Height: | 33.00 mm |
| Housing: | metal housing |
| Design: | electronic |
| Nominal voltage: | 220 to 240 V |
| Multiwatt design: | yes |
| For lamp type TC-D: | no |
| For lamp type TC-DD: | no |
| For lamp type TC-L: | yes |
| For lamp type TC-DEL: | yes |
| For lamp type T7: | no |
| For lamp type T16: | no |
| For lamp type T26: | no |
| For lamp type TR: | no |
| For lamp type TC-T: | yes |
| For lamp type HI: | no |
| For lamp type TC-S: | no |
| For lamp type TC-TEL: | yes |
| For lamp type HM: | no |
| For lamp type HS: | no |
| For lamp type LS: | no |
| For lamp type T16-R: | yes |
| For lamp type T38: | no |
| For lamp type TU: | no |
| For lamp type TC-F: | no |
| For lamp type TC-QEL: | no |
| For lamp type TC-SEL: | no |
| Dimming 0-10 V: | no |
| Dimming 1-10 V: | yes |
| Dimming DALI: | yes |
| Dimming DSI: | no |
| Dimming DMX: | no |
| Dimming potentiometer (device-integrated): | no |
| Dimming LineSwitch: | no |
| Dimming manufacturer-specific: | no |
| Dimming mains voltage modulation: | no |
| Dimming trailing edge: | no |
| Dimming leading edge: | no |
| Dimming programmable: | no |
| Dimming RF: | no |
| Dimming Sine Wave Reduction: | no |
| Dimming Touch and Dim: | no |
| Dimming Zigbee: | no |
| Dimming with push button: | no |
| Without Dimming function: | no |
| Suitable for lamp power (1 lamp): | 18 to 57 W |
| With strain relief: | no |
| Protection class (IP): | IP20 |
