According to 632 Part 1, Part 2-1 and Part 2-3, IEC 669-1, 669-1-2 and 669-2-3, EN 60 669-1, 60 669-2-1 and 60 669-2-3 Electronic Extremely quiet Exact time setting Can be switched on at any time 100% continuous voltage resistant Maximum glow lamp current 50 mA Hand switch for switching from minute light to continuous light Device width 1 Division unit 17.5 mm With Lexic system advantages Rex800Multi 230 V, 50/60 Hz With separate control voltage input 8-230 V AC/DC Multifunctional, the following functions can be set on the side selector switch: TLZ, standard TLZ with pre-warning function according to DIN 18015-2 TLZ with long-term function 1 hour TLZ with pre-warning and long-term function 1 Std. Switchable timer Switchable timer with advance warning function Electronic relay With zero-crossing circuit Automatic 3-/4-wire connection detection 0.5-12 min 1 normally open contact 250 V, 50/60 HZ, 16 A ohmic 2000 W incandescent lamp load/halogen lamps 230 V 2000 W low-voltage halogen lamps EVG 1000 VA fluorescent lamps, series compensated 1000 VA parallel compensated max 100 F 1000 W energy saving lamps
| Property | Value |
| Width in pitch units: | 1 |
| Release delay: | 0.5 to 12 min |
| Function: | electronic with multifunction |
| Mounting type: | DIN rail |
| Control voltage 1: | 8 to 230 V |
| Rated switching current: | 16 A |
| Control voltage type 1: | AC |
| Surge function selectable: | yes |
| Control voltage 2: | 8 to 230 V |
| Control voltage type 2: | AC/DC |
| Frequency of control voltage 1: | 50 to 60 Hz |
| Frequency of control voltage 2: | 50 to 60 Hz |
| Circuit type: | 3- and 4-wire circuit |
| Switch-off warning: | flickering |
| Subsequent switching: | can be switched on later |
| Type of supply voltage: | AC |
| Installation depth: | 70 mm |
| Max. switching current (cos phi = 0.6): | 13 A |
| Button glow lamp current: | 50 mA |
| Supply voltage: | 250 V |
| Max. incandescent lamp load: | 2000 W |
| Max. fluorescent lamp load: | 1000 VA |
| Max. fluorescent lamp load (duo circuit): | 1000 VA |
| Max. Fluorescent lamp load (parallel compensated): | 1000 VA |
| Number of contacts as normally open: | 1 |
