Description
Features
Reviews
Legrand combination surge arrester type 1+2/Class I+II according to IEC/EN 61643-11, 1+1 circuit, for TT and TN-S systems, spark gap basis, nominal voltage 230/400 V AC, lightning impulse current Iimp (10/350) 25 kA/pole. Maximum continuous voltage (Uc) 350 V AC. For protection against overvoltages of downstream consumers caused by direct/indirect lightning strikes or switching operations. With plug-in protection module and status display: Green (SPD ready for use) Orange (replace plug-in protection module), with remote signaling contact to signal the protection status.
| Property | Value |
| Protection level: | 2.5 kV |
| Nominal discharge current (8/20): | 25 kA |
| Highest continuous voltage AC: | 350 V |
| Nominal voltage AC: | 400 V |
| Protection level LN: | 1.5 kV |
| Mounting type: | DIN rail TH35 |
| Size: | 4 TE |
| Signaling on the device: | optical |
| With remote signaling contact: | yes |
| Test class type 2: | no |
| Max. conductor cross-section flexible (fine-stranded): | 25 mm² |
| Max. Conductor cross-section rigid (single/multi-wire): | 35 mm² |
| Protection level N-PE: | 1.5 kV |
| Integrated backup fuse: | no |
| Protection class (IP): | IP20 |
| Network type IT: | no |
| Network type TN: | no |
| Network type TN-C: | no |
| Network type TN-CS: | no |
| Network type TN-S: | no |
| Network type TT: | yes |
| Network type other: | no |
| Number of conductors (without earth): | 2 |
Features
Insert Module Type
Light switch covers
Max. conductor cross-section rigid (single/multi-wire)
35 mm²
Max. conductor cross-section flexible (fine-stranded)
25 mm²
Protection level
2.5 kV
With remote signaling contact
Yes
Number of conductors (excluding earth)
2
Network form TT
Yes
Network type TN-S
No
Test class type 2
No
Network form TN
No
Network type TN-C
No
Network type TN-C-S
No
Protection level L-N
1.5 kV
Protection level N-PE
1.5 kV
Integrated backup fuse
No
Network type IT
No
Manufacturer
HAN
412281
GTIN
3414970517265
Size
4 HP
Highest continuous voltage AC
350V
Mounting type
DIN rail TH35
Nominal discharge current (8/20)
25kA
Nominal voltage AC
400V
IP protection)
IP20
Signaling on the device
Optical
No reviews yet — your comment may be first.
All reviews 0
