LED standby and permanent single battery lights with high-performance LEDs. The micro lens technology in the LEDs ensures optimal light distribution, plug-in terminals 2 × 2.5 mm2, protection class IP 42 and impact resistance IK 07, the two-part light consists of a mounting plate and a single battery light with plug-in terminals for mounting or dismantling the light without disconnecting the connecting cable using the clip system. Nominal operating time 1 and 3 hours, Ni-MH battery, recharge time 24 hours, charge monitoring using a green LED, supply voltage: 230 V +/-10%, 50/60 Hz Class II. Flush-mounted installation for ceiling and wall mounting with installation box (order no. 66170/061721) possible. Addressable single battery light with integrated self-test function. The result is displayed on the two signal LEDs (green = OK and yellow = DEFECTIVE). The lights can be operated either in permanent or standby mode. When using the monitoring center (order no. 062600), the light must be addressed. The lights are connected to the center using a 2-pole bus cable (2 x 1.5 cm²). The light is addressed using the programming remote control (order no. 062610). The visualization is done via the software (order no. 062602).
| Property | Value |
| Housing color: | white |
| Protection type (IP): | IP42 |
| Protection class: | II |
| Voltage type: | AC |
| Color temperature: | 6000 K |
| Length: | 285 mm |
| Width: | 125 mm |
| Height/Depth: | 55 mm |
| Max. System performance: | 25 W |
| Battery type: | NiMh |
| Nominal operating time: | 1 h |
| Rated luminous flux according to IEC 62722-2-1: | 250 lm |
| Luminous flux in standby mode: | 120 lm |
| Operating device: | LED operating device, current-controlled |
| Light source: | LED not replaceable |
| Impact resistance: | IK07 |
| Socket: | other |
| Rated voltage: | 230 V |
| With remote switch connection: | no |
| Cover material: | transparent plastic |
| With light source: | yes |
| Monitoring device: | automatic self-test |
| Mounting type: | Wall mounting |
| Material of the housing: | Plastic |
| Suitable for type of marking: | Sticker |
| Supply: | decentralized (single battery) |
| Function: | Escape route lighting/marking |
| With pictogram: | no |
| Number of light heads: | 1 |
| LED nominal current at constant current: | 110 mA |
| Light distributor: | Diffuser lens/optics/panel |
| Rated service life L70/B50 at 25 °C: | 147000 h |
| Luminaire with limited surface temperature 'D-mark': | no |
| Number of poles: | 4 |
| Conductor cross-section: | 2.5 mm² |
| Connection type: | screw connection |
