Description
Features
Reviews
Mosaic motion detector with manual operation, 2-wire connection (without N-wire). Detection range: 120°. Detection range: 8 m fixed. Brightness threshold: 5 -1275 lux. Switch-off delay: 10 sec.-10 min.Suitable for the following load types:. Incandescent and HV halogen lamps: 3 -250 W. LEDs, fluorescent and compact fluorescent lamps and LV halogen lamps with electronic or conventional ballast: 3 -250 VA. LED or compact fluorescent lamps: 3 -100 WParallel connection of several motion detectors possible (max. 2 additional sensors). The settings are made using a potentiometer.
| Property | Value |
| Depth: | 52 mm |
| Width: | 45 mm |
| Height: | 45 mm |
| Design: | Motion detector |
| Color: | white |
| Rated voltage: | 230 V |
| RAL number (similar): | 9003 |
| Material: | Plastic |
| Mounting type: | Flush-mounted |
| Response brightness: | 5 to 1275 lx |
| Protection class (IP): | IP40 |
| Max. switching capacity: | 250 W |
| Type of voltage: | AC |
| Max. Range to one side: | 6 m |
| Suitable for wall mounting: | yes |
| Min. duty cycle: | 10 s |
| Max. Duty cycle: | 10 min |
| Creep-under protection/rear field monitoring: | no |
| Temperature: | -5 to 35 °C |
| Adjustable response brightness: | yes |
| Adjustable response sensitivity: | no |
| Max. range, frontal: | 8 m |
| Max. Inrush current: | 1.8 A |
| Sensor type: | passive infrared |
| Optimal installation height: | 1.2 m |
| Surface finish: | glossy |
| Surface: | untreated |
| Material quality: | thermoplastic |
| Detection field diameter on floor: | 8 m |
| Control current: | 1.8 mA |
| Horizontal detection angle: | -60 to 60 ° |
| Frequency: | 50 to 60 Hz |
| Halogen-free: | no |
| Constant light control: | yes |
| HVAC control: | no |
| Forced shutdown: | yes |
| Animal corridor: | no |
| Networkable: | no |
| Staircase monitoring: | yes |
| Bypass switch: | yes |
| Suitable for wireless transmission: | no |
| Remote controllable: | no |
| With signal unit: | yes |
| Alarm function: | no |
| Teach function for response brightness: | no |
| Dimming function with dimming insert: | no |
| Transparent: | no |
| With remote control: | no |
| With DALI interface: | no |
| Extension input: | no |
| Suitable for ceiling mounting: | no |
| Connection type: | Screw terminal |
| Antibacterial treatment: | no |
| Impact resistance: | IK04 |
| Installation depth: | 34 mm |
| Min. depth of the device box: | 40 mm |
Features
Insert Module Type
Light switch covers
Color
White
Bridging switch
Yes
With signal unit
Yes
Response brightness
5 to 1275 lx
Forced shutdown
Yes
Max. inrush current
1.8 A
Manufacturer
HAN
078459
GTIN
3414970566249
Dimming function with dimming insert
No
Alarm function
No
Connection type
Screw terminal
Response sensitivity adjustable
No
Response brightness adjustable
Yes
Antibacterial treatment
No
Version
Motion detector
Surface finish
Glittering
Width
45 mm
Installation depth
34 mm
Detection field diameter on floor
8m
Detection angle horizontal
-60 to 60 °
Color
Remote controllable
No
Frequency
50 to 60 Hz
Suitable for ceiling mounting
No
Suitable for wall mounting
Yes
Suitable for wireless transmission
No
HVAC control
No
Halogen free
No
Height
45 mm
Constant light control
Yes
Max. duty cycle
10mins
Max. range frontal
8m
Max. range to one side
6m
Max. switching capacity
250W
Min. duty cycle
10s
Min. depth of the device box
40 mm
With DALI interface
No
With remote
No
Mounting type
Flush-mounted
Extension input
No
Nominal voltage
230V
Surface
Untreated
Optimal mounting height
1.2m
RAL number (similar)
9003
Impact resistance
IK04
IP protection)
IP40
Sensor type
Passive infrared
Voltage type
AC
Teach function for response brightness
No
Temperature
-5 to 35 °C
Depth
52 mm
Animal corridor
No
Transparent
No
Staircase monitoring
Yes
Creep protection/rear field monitoring
No
Networkable
No
Material
Plastic
Material quality
Thermoplastic
No reviews yet — your comment may be first.
All reviews 0
