Special features: Efficient radial duct fan made of powder-coated sheet steel. Can be used for industrial and residential installations. Radial impeller with backward-curved blades. Low noise and high pressure. Small space requirement due to compact dimensions. For direct installation between pipes, depending on the installation position for ventilation or exhaust. Round connection pieces on the suction and pressure sides matched to standard pipes. Mounting foot available as an accessory. Air flow direction: Air flow and direction of rotation are indicated by arrows on the fan housing. Motor: External rotor capacitor motor. Operating capacitor ready for connection in the terminal box. Speed controllable. Thermal overload protection (temperature sensor in motor winding) as standard. The overload protection switches the fan off automatically if it overheats. Robust motor with ball bearing, maintenance-free. Protection class IP X4 when installed in ventilation ducts with at least 1 m of pipe on the suction and pressure side. Installation instructions: Installation possible in any position. Use optional elastic ELR sleeves to avoid vibration transmission to the pipe system. Electrical connection: External terminal box with cable entry grommet. Safety instructions: Only operate the fan with free intake or exhaust if the impeller is protected against contact in accordance with DIN EN ISO 13857. To do this, attach the optional SGR protective grille.Article: ERR 10/1 S, delivery volume: 250 m3/h, speed: 2518 1/min, impeller type: radial, speed controllable: yes, reversibility: no, energy efficiency class: F, voltage type: alternating current, rated voltage: 230 / 220 V, mains frequency: 50 Hz / 60 Hz, rated power: 51 W, IMax: 0.23 A, protection class: IP X4, thermal class: B, pole-changing: no, installation position: vertical / horizontal, material: sheet steel, powder-coated, housing material: sheet steel, powder-coated, color: light gray, weight: 2.84 kg, weight with packaging: 3.41 kg, nominal width: 100 mm, width: 254 mm, height: 291 mm, depth: 230 mm, width with packaging: 310 mm, height with packaging: 310 mm, depth with packaging: 270 mm, conveying medium temperature at rated current: 60 °C, conveying medium temperature at IMax: -20 °C to 60 °C, DC motor: false
| Property | Value |
| Diameter of the housing: | 254 mm |
| Air volume unloaded: | 250 m³/h |
| Material of the housing: | stainless steel |
| Protection class (IP): | IPX4 |
| DC motor: | no |
| Length: | 230 mm |
