Maico 0084.0105 Fan insert ER 60 I

Version with interval control: The interval control ensures that rooms that are only used irregularly are ventilated. Time interval can be set from 1 to approx. 15 hours. Operating time per interval approx. 10 minutes. With manual operation (e.g. via light switch) there is a switch-on delay of approx. 50 seconds and a run-on time of approx. 10 minutes. Interval control can be switched off. Speed cannot be controlled. Fan with cover and ISO Coarse > 30% (G2) filter for installation in a flush-mounted housing. For one-room or two-room ventilation with a single fan (exception: version H). Easy filter change without tools. Cover can be rotated by +- 5°, allowing compensation if the housing is installed at an angle. Simple and quick installation of the fan in the housing using the snap fastener and the electrical plug connection. Color traffic white, similar to RAL 9016. All MAICO ER devices correspond to protection class IP X5 and can therefore be installed in area 1 according to DIN0100-701, even with water jets. For details see planning information. Protection class II. The extremely steep characteristic curve shows the high pressure capacity of the ER fans. Robust energy-saving capacitor motor. Motor with thermal overload protection. Maintenance-free, with ball bearings closed on both sides. Volume flow characteristic curve and leakage air rate tested by TÜV Bayern eV. Leakage air volume flow < 0.01 m3/h. Shaft level difference in accordance with DIN 4109, tested by IAB Oberursel. With VDE mark. Article: ER 60 I, design: interval control, flow volume: 62 m3/h, speed: 1250 1/min, air direction: ventilation, speed controllable: no, SEC average: -3.43 kWh/(m2*a), voltage type: alternating current, rated voltage: 230 V, mains frequency: 50 Hz, power consumption: 21 W, IMax: 0.16 A, protection class: IP X5, mains cable: 5 / 1.5 mm2, installation location: wall / ceiling, installation type: flush-mounted, system type: decentralized, material: plastic, color: traffic white, similar to RAL 9016, weight: 1.52 kg, weight with packaging: 1.8 kg, filter class: ISO Coarse > 30% (G2), blow-out direction: side, width: 250 mm, height: 250 mm, depth: 150 mm, width with packaging: 280 mm, height with packaging: 280 mm, depth with packaging: 155 mm, conveying medium temperature at IMax: 40 °C, run-on time: 10 min / run-on time available when using an optional switch (e.g. light switch), switch-on delay: 50 s / switch-on delay available when using an optional switch (e.g. light switch), sound pressure level: 36 dB(A) / specification according to DIN 18017-3 with an equivalent absorption area AL = 10 m2, nominal width: 75 mm / 80 mm