Maico 0084.0160 ER-APB 60 H surface-mounted fan

Version with humidity control and base load switching: Barrier-free product, as automatic switching on/off is possible via humidity control. Fully automatic intelligent humidity control. No setting of the switch-on humidity necessary. Fan monitors the room humidity independently and ventilates automatically. Not speed controllable. Not suitable for second room ventilation. Manual operation via a switch is possible, e.g. switching on full load via light switch. Standard switching: Fan runs in base load mode, humidity control is active, full load operation when the switch-on point is exceeded, base load operation when the switch-off point is undershot. Other switching variants: Fan operation with or without base load mode, manual switching on of full load, switching the fan on or off via a switch. Switching on of full load via the light switch and associated run-on control (run-on time 15 min) of the fan. The fan runs until the humidity in the room has fallen below the switch-off humidity. After 60 min at the latest, the run-on time is activated and the fan is then switched off. Surface-mounted fan with ISO Coarse > 30% (G2) filter for ventilating kitchens, bathrooms or toilets. Metal exhaust nozzle DN 75/80 with maintenance-free metal shut-off flap and automatic release device to prevent fire spread K90-18017. Metal shut-off flap also serves as a cold smoke flap. Housing can be rotated, allowing the exhaust nozzle to be connected to the main line at the top left or top right. Filter can be changed easily without tools. The fan is easy and quick to install in the housing using the snap-on fastening and the electrical plug connection. Color: traffic white, similar to RAL 9016. All MAICO ER devices comply with protection class IP X5 and can therefore be installed in area 1 according to DIN0100-701, even with water jets. See planning information for details. Protection class II. The extremely steep characteristic curve shows the high pressure capacity of the ER fans. Robust, energy-saving capacitor motor. Motor with thermal overload protection. Maintenance-free, with ball bearings closed on both sides. Volume flow characteristic curve and leakage air rate tested by TÜV Bayern eV. Leakage air volume flow < 0.01 m3/h. Shaft level difference in accordance with DIN 4109, tested by IAB Oberursel. With VDE mark.Article: ER-APB 60 H, Design: Humidity control, Delivery volume: 35 m3/h / 61 m3/h, Speed: 900 1/min / 1250 1/min, Air direction: Ventilation, Speed controllable: no, SEC average: -20.23 kWh/(m2*a), Rated voltage: 230 V, Mains frequency: 50 Hz, Power consumption: 11 W / 21 W, IMax: 0.13 A / 0.17 A, Protection class: IP X5, Mains cable: 5 / 1.5 mm2, Installation location: Wall / ceiling, Installation type: Surface-mounted, System type: decentralized, Material: Plastic, Color: traffic white, similar to RAL 9016, Weight: 2.17 kg, Weight with packaging: 2.73 kg, Filter class: ISO Coarse > 30% (G2), Fire protection: yes, shut-off device: integrated metal shut-off flap with release device, connection diameter: 75 mm / 80 mm, width: 236 mm, height: 236 mm, depth: 217.5 mm, width with packaging: 255 mm, height with packaging: 335 mm, depth with packaging: 255 mm, conveying medium temperature at IMax: 40 °C, run-on time: 6 min / run-on time available when using an optional switch (e.g. light switch), sound pressure level: 33 dB(A) / 43 dB(A) / specification according to DIN 18017-3 with an equivalent absorption area AL = 10 m2, approval number: Z-51.1-45, nominal width: 75 mm / 80 mm