Maico 0084.0220 Small room fan AKE 100

Design: Application area up to approx. 30 m2 per fan. Diverse system expandability: Connection of a supply air fan (e.g. ECA 11 E) possible to increase air exchange. Fully automatic, intelligent basement dehumidification for the highest demands. Permanent adjustment of the absolute humidity inside and outside: Fan ventilates independently if the absolute humidity in the room is higher than outside. No maintenance or manual control required: Install once and the system works automatically. Additional fans without their own dew point control can be connected directly to the AKE up to a maximum of 600 mA and benefit from the intelligence. Fans > 600 mA can be connected with an intermediate relay or contactor and thus larger or multiple rooms can be dehumidified via the AKE. Concealed intake thanks to design cover. Barrier-free product as it switches on/off automatically without additional switches. Fan monitors the room humidity. Frost protection function: System switches off when indoor temperatures fall below 5 °C. Dry protection function: The system switches off when the relative humidity is less than 30%. Additional manual operation for 20 minutes can be switched on and off again using a button. No additional installation from the switch to the device is necessary. Additional manual continuous operation with a switch is possible. Status and function display via LEDs. Scope of delivery: Fan, external closure flap, sensors, 1 m connection cable, housing made of impact-resistant plastic. Thermal overload protection. Protection class II. Frost protection: The AKE has a frost protection function to prevent the room from cooling down. The fan switches off automatically when the indoor temperature is less than 5 °C. Dry protection: The AKE has a dry protection function to prevent the room from drying out. The fan switches off automatically when the relative humidity is less than 30%. Motor: Energy-saving, robust motor with ball bearings, maintenance-free. Suitable for continuous operation. Installation instructions: Easy installation: AKE 100: Core hole 105 mm, or 120 mm when installed with wall sleeve accessory WH 100. AKE 150: Core hole 155 mm, or 170 mm when installed with wall sleeve WH 150. Wall and ceiling mounting possible. Electrical connection: Electrical connection optionally surface or flush-mounted. Surface-mounted installation for AKE 100 with accessory spacer frame ECA-DR.Article: AKE 100, delivery volume: 92 m3/h, speed: 2500 1/min, speed controllable: no, reversibility: no, SEC average: -24.18 kWh/(m2*a), voltage type: alternating current, rated voltage: 230 V, mains frequency: 50 Hz, nominal power: 8 W, stand-by power consumption: 2 W, IMax: 0.06 A, protection class: IP X4, mains cable: 5 / 1.5 mm2, installation location: wall, installation type: surface-mounted, installation position: any, material: plastic, color: traffic white, similar to RAL 9016, weight: 0.848 kg, weight with packaging: 1.132 kg, flap: none, nominal width: 100 mm, cable length: 1 m, width: 159 mm, height: 159 mm, depth: 130 mm, width with packaging: 225 mm, height with packaging: 225 mm, depth with packaging: 200 mm, wall thickness: max. 0.85 m (if 1m cable length is not sufficient, please order the 6m sensor cable), conveying medium temperature at IMax: 40 °C, sound pressure level: 32 dB(A) / distance 3 m, free field conditions