For ohmic, inductive and capacitive loads, e.g. light bulbs, dimmable wound transformers or electronic transformers. (Phase control or phase control). The universal dimmer automatically detects the connected load. Do not connect mixed loads. With memory function, can be switched off. Nominal voltage: AC 230 V, 50 Hz. Minimum load: 25 VA. Maximum load: 420 VA. Neutral conductor: not required (2 conductor system).
To be completed with:
Sensor surface System M 5776.., 5701.., 5704.., System Area 5737.., AQUADESIGN 5738..
TELE sensor surface System Area 5709..
Radio sensor surface CONNECT for dimmer inserts System M 5036.., 5026.., System Area 5046..
Extension operation: With mechanical buttons.
Extension operation:
Extension insert 573999.
Extension TELE insert 573998.
Note: With the CONNECT wireless sensor surface for dimmer inserts, the minimum load is 75 VA. In conjunction with the CONNECT wireless system, the insert can only be used from version 3A. Version: 25-420 VA.
| Property | Value |
| Device height: | 73.0 mm |
| Device width: | 73.0 mm |
| Device depth: | 42.0 mm |
| Connection type: | Screw terminal |
| Wire cross section: | 1.5 mm² |
| Mounting type: | Flush-mounted |
| Dimming phase control: | yes |
| Dimming trailing edge: | yes |
| Nominal voltage: | 230.0 V |
| Suitable for protection class (IP): | IP20 |
| Operating method: | Touch button |
| Halogen-free: | yes |
| Composition: | Basic element |
| Load type: | universal |
| Series dimmer: | no |
| Extension input: | yes |
| Light value memory: | yes |
| Can be used with button: | yes |
| Can be used with motion detector: | no |
| Can be used with presence detector: | no |
| Can be used with timer: | no |
| Can be used with radio button: | yes |
| Can be used with IR button: | yes |
| Mounting type: | claw/screw fastening |
| Surface: | untreated |
| Frequency: | 50.0 to 60.0 Hz |
| Control voltage: | 230.0 V |
| Transparent: | no |
| App control via Bluetooth: | no |
| Impact resistance: | IK02 |
| Min. depth of the device box: | 46.0 mm |
