MERTEN 616725 KNX room temperature controller System M | Standard | active white glossy

![CDATA[In the design system M. The device is a room temperature controller and a binary input. Depending on the operating mode, the current temperature setpoint and the room temperature, a manipulated variable for heating or cooling control is sent to the KNX. The temperature can be recorded either by the internal or by an external temperature sensor that is connected to the terminal block of the button interface. The button interface internally generates a signal voltage for connecting a maximum of four conventional buttons/potential-free contacts. Two of these inputs can be used to connect low-current LEDs. With integrated bus coupler. The bus is connected via a bus connection terminal. Software functions KNX functions Room temperature controller Controller type 2-point control, continuous PI control, switching PI control (PWM). Output Continuous in the range 0xx100% or switching ON/OFF. Controller mode -Heating with one controller output. Cooling with one controller output.]]>