For System M. Presence detection indoors. If the KNX ARGUS Presence detects small movements in the room, data telegrams are sent via KNX to control lighting, blinds or heating, for example. With brightness-dependent motion detection for lighting control, the device constantly checks the brightness in the room. If there is sufficient natural light, the device switches off the artificial light even if a person is present. The run-on time can be set via the ETS. With integrated bus coupler. For wall mounting in a 60 mm installation box, optimal use at 2.2 m. With creep-under protection. KNX software functions: Five motion/presence blocks: Up to four functions can be triggered per block. Telegrams: 1 bit, 1 byte, 2 bytes. Normal operation, master, slave, monitoring, safety pause, lock function. Two motion sensors: Sensitivity and range can be set separately for each sensor. Learnable stairwell light time. Actual brightness value: Can be detected via the internal and/or an external light sensor. Actual value correction. Detection angle: 180 degrees. Range: 8 m right/left, 12 m forwards (at a mounting height of 2.20 m). Mounting height: 2.2 m or 1.1 m with half the range. Time: adjustable in steps from 1 s to 8 min (potentiometer) or adjustable from 1 s to 255 hours (ETS). Number of levels: 6. Number of zones: 46. Number of motion sensors: 2, separately adjustable. Light sensor: internal light sensor continuously adjustable from approx. 10 to 2000 lux (ETS), external light sensor via KNX. EC directives: Low Voltage Directive 2006/95/EC and EMC Directive 2004/108/EC.
Scope of delivery: With bus connection terminal and support plate. With cover segments to limit the detection area.
Material: Thermoplastic, matt.
Color: aluminum.
| Property | Value |
| Number of channels: | 5.0 |
| Optimal mounting height: | 2.2 m |
| Color: | Aluminum |
| Design: | Presence detector |
| Mounting type: | Flush-mounted |
| KNX bus system: | yes |
| Max. Range to one side: | 8.0 m |
| Max. range frontal: | 12.0 m |
| Horizontal detection angle: | 0.0 to 180.0 ° |
| Min. duty cycle: | 1.0 s |
| Max. Duty cycle: | 15300.0 min |
| Detection field diameter on floor: | 16.0 m |
| Response brightness adjustable: | yes |
| Teach function for response brightness: | no |
| Self-learning switch-off delay: | no |
| Bus system radio bus: | no |
| Bus system LON: | no |
| Bus system Powernet: | no |
| Other bus systems: | without |
| Material: | Plastic |
| Material quality: | Thermoplastic |
| Surface: | painted |
| Surface finish: | matt |
| With bus connection: | yes |
| Extension input: | no |
| Creep-under protection/rear field monitoring: | yes |
| Animal corridor: | no |
| Staircase monitoring: | yes |
| Transparent: | no |
| KNX radio bus system: | no |
| Bidirectional radio: | no |
| Operating mode switch: | no |
| Min. depth of device box: | 46.0 mm |
