MERTEN MEG4366-0120 TYPE A+C 45W USB charging station insert

The Merten System M USB charger MEG4366-0120 is a device with a fixing frame and claws with 2 USB outputs A+C that allows charging mobile/tablet and notebook devices. The input voltage of this device is 240V. The power consumption is less than 0.1W and the nominal output power of this USB charger is 45W with PD technology. The output voltage and the corresponding current are automatically adjusted by the PD protocol: 5V/3A 9V/3A 12V/3A 15V/3A 20V/2.25A for USB C and 5V 1.5A 7.5W for USB A. In addition, the nominal operating voltage of this device is between 100 volts and 240 volts. The output voltage of this device varies between 5 - 20 volts. This USB charger has electronic overload and temperature protection, which increases the level of safety. It is attached using screws. The installation box can be flush mounted in the surface. The dimensions are 51 mm wide, 40.7 mm high and 30 mm deep, with a mounting depth of 30.8 mm. This USB charger is very robust, with a service life of 30,000 hours. In addition, it achieves protection class IK04, which protects against an impact of 0.5 joules. This USB charger achieves protection class IP20 against solid objects and liquids. In addition, it complies with the directives 2002/95/EC - RoHS Directive, 2002/96/EC - WEEE Directive, 2004/108/EC - electromagnetic compatibility, 2006/95/EC - Low Voltage Directive. HS Directive, 2002/96/EC - WEEE Directive, 2004/108/EC - Electromagnetic Compatibility, 2006/95/EC - Low Voltage Directive. As this device is environmentally friendly, it also complies with Regulation (EC) No. 1907/2006. The USB charger is made of PC (polycarbonate) GF10 FR, making it as durable as possible. It has also received the EAC Validation. In addition, it complies with the standards EN 60950-1, EN 62684, ETSI EN 301 489-4. The System M range is based on 4 different finishes and materials. With 9 different design variants and over 280 functions, the system can fulfill every customer request.