Connection unit for mounting on a TH35 mounting rail in accordance with DIN EN 60715 in electrical distributors for domestic and industrial installations, equipped with an E-DAT module RJ45 single module, cable access 45° from above, plug-in direction inclined 45° downwards, compliance with class EA in accordance with ISO/IEC 11801 Ed.2.2:2011-06, DIN EN 50173-1:2011-09, tested: link up to 500 MHz, suitable for 10 GBit Ethernet (IEEE 802.3an), remote powering (PoE, PoE plus, UPoE and 4PPoE) and HDBaseT, easy-to-install connection of the 2- to 4-pair data cable AWG 26/1 - 22/1 and stranded conductor with 7-wire copper strand AWG 26/7 to BTR 8-way IDC insulation displacement terminals, Marking of the wire assignment T568A or T568B, easy and quick insertion of the wire pairs in the E-DAT module charging unit, the width of 1TE enables the installation of up to 12 REG in standard electrical distribution boards, when installed as a device of protection class I, the potential equalization takes place via an integrated potential equalization plate directly on the mounting rail, which is connected to the building potential equalization via appropriate contact terminals, the module is protected against direct contact by a cover. When installed in protectively insulated distribution boards, protection class II is therefore maintained. For this, the potential equalization spring must be removed.integrated dust protection flap (also available in color)
| Property | Value |
| Mounting type: | DIN rail TH35 |
| Design of the Mounting rail adapter: | straight |
| Material: | Plastic |
