Channel connection unit with one or two 8-pin RJ45 sockets, Cat.6, A Component testing according to ISO/IEC 11801 Ed.2.2:2011-06, DIN EN 50173-1:2011-09, TIA/EIA-568-C.2 (2009-08) and IEC 60603-7-51 Ed.1 (12/2008), GHMT validatedCompliance with class E, A up to 500 MHz according to ISO/IEC 11801 Ed.2.2:2011-06, DIN EN 50173-1:2011-09Tested: Component up to 600 MHz, Link up to 800 MHz, for 10 GBit Ethernet (IEEE 802.3an), Remote Powering (PoE, PoE plus, UPoE and 4PPoE) and HDBaseT, HF-technically optimized and ergonomically shaped LSA connection terminal, screwing of the flap for strain relief and shield removal takes place from the front, practical cable feed from 8 sides, connection of data cables AWG26/1 - 22/1 (single-wire), plug direction 45° inclined downwards, compatible with design center pieces of switch ranges, suitable for installation in standard flush-mounted cups and hollow wall cups, without cover parts, variants: 1 port, 2 port
| Property | Value |
| Category: | 6A (IEC) |
| Connection type: | LSA |
| Sockets shielded: | yes |
| Housing shielded: | yes |
| Separate ground connection: | no |
| With text field: | no | Designable: | yes |
| Separate cable strain relief: | yes |
| Surface-mounted: | no |
| Installation type shield connection: | screw |
| Outlet direction: | slanted |
| With dust protection: | yes |
| Termination resistor: | no |
| Mechanical coding: | no |
| Color coding: | no |
| Device width: | 69.90 |
| Device height: | 69.90 |
| Device depth: | 38.50 |
| Flush-mounted: | yes |
| Duct installation: | yes |
| Floor tank/underfloor installation: | no |
| Mounting type: | screws |
| Composition: | Base element with adapter plate |
| Connector type: | RJ45 8 (8) |
| With sockets/couplings: | yes |
| Suitable for number of sockets/couplings: | 2 |
