Channel connection unit with E-DAT module, Cat.6, A Component testing according to ISO/IEC 11801 Ed.2.2:2011-06, DIN EN 50173-1:2011-09, TIA/EIA-568-C.2 (2009-08) and IEC 60603-7-51 Ed.1 (12/2008), GHMT validatedCompliance with class E, A according to ISO/IEC 11801 Ed.2.2:2011-06, DIN EN 50173-1:2011-09Tested: Link up to 500 MHz, suitable for 10 GBit Ethernet (IEEE 802.3an), remote powering (PoE, PoE plus, UPoE and 4PPoE) and HDBaseT, easy-to-install connection of the 2 to 4-pair data cable AWG 26/1 - 22/1 and stranded conductor with 7-wire copper strand AWG 26/7 - 22/7 on BTR 8-way IDC insulation displacement terminals, marking of the wire assignment T568A or T568B, plug direction of the module inclined 45° downwards, strain relief with cable ties on the module, compatible with design central pieces of switch ranges (note: 3-port central pieces are currently only available from JUNG), not suitable for installation in standard flush-mounted and hollow wall cups!, variants: 1 port, 2 port, 3 port
| Property | Value |
| Category: | 6A (IEC) |
| Connection type: | Insulation displacement terminal IDC |
| Sockets shielded: | yes |
| Housing shielded: | yes |
| Separate earth connection: | yes |
| With text field: | no |
| Designable: | yes |
| Separate cable strain relief: | yes |
| Surface-mounted: | no |
| Installation type shield connection: | Terminal |
| Outlet direction: | slanted |
| With dust protection: | no |
| Terminal resistor: | no |
| Mechanical coding: | no |
| Color coding: | yes |
| Device width: | 69.90 |
| Device height: | 69.90 |
| Device depth: | 32.90 |
| Flush-mounted: | yes |
| Duct installation: | yes |
| Floor tank/underfloor installation: | no |
| Fastening type: | screws |
| Composition: | Base element with adapter plate |
| Connector type: | RJ45 8 (8) |
| With sockets/couplings: | yes |
| Suitable for number of sockets/couplings: | 3 |
