Connection unit for mounting on TH35 mounting rail according to DIN EN 60715 in electrical distributors for domestic and industrial installations, equipped with an E-DAT module RJ45 single module, cable access 45° from above, plug direction 45° downwards, Cat.6, A Component testing according to ISO/IEC 11801 Ed.2.2:2011-06, DIN EN 50173-1:2011-09, TIA/EIA-568-C.2 (2009-08) and IEC 60603-7-51 Ed.1 (12/2008), GHMT validated Compliance with Class E, A according to ISO/IEC 11801 Ed.2.2:2011-06, DIN EN 50173-1:2011-09 tested: Link up to 500 MHz, for 10 GBit Ethernet (IEEE 802.3an), remote powering (PoE, PoE plus, UPoE and 4PPoE) and HDBaseT suitable, easy-to-install connection of the 2- to 4-pair data cable AWG 26/1 - 22/1 and stranded conductors with 7-wire copper strand AWG 26/7 - 22/7 to BTR 8-way IDC insulation displacement terminals, marking of the wire assignment T568A or T568B, easy and quick insertion of the wire pairs in the E-DAT module loading piece, the width of 1TE enables the installation of up to 12 REGplus in standard electrical distributors, when installed as a device of protection class I, the potential equalization takes place via an integrated potential equalization plate directly above the mounting rail, which is to be connected to the building potential equalization via appropriate contact terminals, the module is protected against direct contact by a cover. When installed in protectively insulated distributors, protection class II is maintained. The potential equalization spring must be removed for this. Integrated dust protection flap (also available in color)
| Property | Value |
| Mounting type: | DIN rail TH35 |
| Design of the mounting rail adapter: | straight |
| Material: | metal |
