GRP cable tray, pressed, with unperforated side rails and base, with molded connector, mechanical strength in accordance with IEC 61537, please order appropriate fastening accessories separately, halogen-free. An expansion distance of 8 mm must be taken into account. Due to the expansion of the material, the following must be observed during assembly: - The cable tray should not be screwed close to or at the joint. - When screwing the cable tray onto the brackets, a through hole of Ø 9 mm for the FKM 6X20 E4 screws must always be made in the tray. Article also available in ...AC (resin mixture with acrylic resin). Dimensions (approx. dimensions) H x W: 50 x 50 mm Material thickness t: 3 mm Load-bearing capacity F at a support distance of 1.5 m: 0.05 kN/m Delivery length: 3000 mm Usable cross-section: 1496 mm² Material: UP-GF (glass fiber reinforced polyester) Color: pebble gray RAL: 7032 (similar)
| Property | Value |
| Height: | 50 mm |
| Width: | 50 mm |
| Length: | 3000 mm |
| Material: | Plastic |
| Surface: | other |
| Suitable for functional integrity: | no |
| Material thickness: | 3 mm |
| RAL number: | 7032 |
| Side holes: | no |
| Usable cross-section: | 1496 mm² |
| Mounting holes in the base: | no |
| NATO hole pattern: | no |
| Design: | integrated connector |
| Wide span design: | no |
| Stainless steel, pickled: | no |
| Material quality: | GFRP |
| With upper part: | no |
