Cable support tray system for wall mounting or for fastening to rails. In accordance with 0298-565-1 and 0298-565-2, a maximum support distance of 0.8 m should not be exceeded. The load-bearing capacity information only applies if the supporting surface is sufficiently anchored and if the surfaces of the vertical profile/anchor rails and the tray support rails in the clamping area are made of steel or galvanized steel. If the clamping area has a coat of paint, this must be removed, otherwise the load-bearing capacity is not given or guaranteed. Danger of slipping! 1. The cable support tray system is available in tray widths of 40, 50, 60, 70, 80 and 120 mm on request. Fastening material must be ordered separately, depending on the application. Dimensions (approx. dimensions) Tray W x L: 100 x 200 mm Number of support trays one above the other: 5 Distance between support trays: 100 mm Load capacity F at B/2: 0.5 kN Rail H x W: 485 x 72 mm Rail holes: 11 x 16 mm Center hole spacing: 100 mm Number of holes: 5 Material: Steel, hot-dip galvanized in accordance with DIN EN ISO 1461
| Property | Value |
| Material: | Steel |
| Stainless steel, pickled: | no |
| Material quality: | other |
