Nail anchor. Anchor for use in concrete for multiple fastening. The nail anchor is placed in a drill hole and spread by applying the load. The nail anchor is suitable for push-through installation. To be installed by lightly hammering the nail head. Permissible loads for centric tension, transverse load and diagonal tension at any angle as well as anchor parameters and component dimensions for concrete strength classes C 20/25 and C 50/60. The European Technical Assessment (ETA) must be observed. The anchoring is designed in accordance with EN 1922-4:2018, design method C and Technical Report TR 055, 02/2018. For use in integrated functional integrity in accordance with DIN 4102-12 and -4 or for suspended ceilings with fire protection requirements (Model Pipeline System Guideline MLAR 02/2015), please observe additional regulations! Area of application The anchor can be used as a multiple fastening for anchoring suspended ceilings, wall cladding and suspended ceilings in accordance with DIN 18168, as well as for statically comparable anchoring up to 1 kN/m² - also in the tensile zone generated by load stresses. Technical details Total length L: 65 mm Nominal bore diameter: 6 mm Clamping range t fix: 30 mm Material: Stainless steel, material no. 1.4401, 1.4404 Approval no. : ETA-18/0541 Further approvals: DoP NI001
| Property | Value |
| Length: | 70 mm |
| Sleeve material: | stainless steel |
| Surface: | untreated |
| Thread size (metric): | 6 |
| Bore hole diameter: | 6 mm |
| Min. Drill hole depth: | 75 mm |
| Fastening device: | other |
| Permissible load in tensile zone: | 1.4 kN |
| With approval: | yes |
| Thread type: | metric |
| Self-drilling: | no |
