Joint connector, horizontal, screwless, for horizontal changes in direction and a longitudinally aligned connection of the cable ladders and their fittings at the joint. When assembling the cable ladders, an assembly distance of approx. 30 mm must be taken into account. It must also be ensured that the elongated holes in the connectors are arranged on the side of the joint on which the boom is located. The ULP 100 assembly pliers are used as an assembly aid. The connector holes enable permanent fastening and ensure that the material can expand. To ensure correct assembly, 4 FKM 6X20 E4 screws must be attached per connector under high loads. Can be used for: GRP cable ladder UL 150... GRP cable ladder ULL 150... and their fittings Required: 1 pair (2 pieces) per joint Dimensions (approx. dimensions) H x L: 138 x 150 mm Material thickness t: 1.5 mm Fastening holes, two rows: Ø 8 mm and 8x20 mm Center distance: 45 mm Row spacing: 80 mm Material: Stainless steel, material no. 1.4404, AISI 316L
| Property | Value |
| Suitable for functional integrity: | no |
| Suitable for cable support system width: | 150 to 900 mm |
| Length: | 150 mm |
| Design: | Longitudinal connector |
| Hinged connector horizontal: | yes |
| Hinged connector vertical: | no |
| Connection type: | screwless connector |
| Suitable for mesh cable tray: | no |
| Suitable for cable ladder: | yes |
| Suitable for cable tray: | no |
| Suitable for cable support system height: | 150 mm |
| Material: | stainless steel |
| Stainless steel, pickled: | no |
| Material quality: | rust and acid-resistant steel |
| Surface: | other |
