GRP T-piece, pultruded, with unperforated side rails, but with connector holes and with unperforated rungs made of C-profile that are open at the top with a slot width of approx. 17 mm, for creating horizontal 90° T-branches, please order corresponding fastening accessories separately, halogen-free. The following must be observed during assembly: - When connecting the fitting, an assembly distance of approx. 30 mm must be taken into account. - The fitting must be supported with brackets at each cable ladder access. - If the radius > 250 mm and/or the width > 400 mm, additional central support should be provided. - To ensure correct assembly, the connectors at each cable ladder access must be screwed with 4 FKM 6X20 E4. GRP T-piece with connecting straps (1) made of stainless steel on request. GRP T-piece with unperforated rungs for realizing the radii R600 and R900 on request. The joint connectors ULGH 150/150 and ULIH 150 E4 are not included in the scope of delivery (please order separately). Use for: GRP cable ladder UL 150... GRP cable ladder ULL 150... Dimensions (approx. dimensions) H x W: 150 x 300 mm Length in main direction: 690 mm + B Radius R: 250 mm Material: UP-GF (glass fiber reinforced polyester) Screw material: stainless steel, material no. 1.4404, AISI 316L Color: pebble gray RAL: 7032 (similar)
| Property | Value |
| Design of the side rail: | Profile (open) |
| Suitable for functional integrity: | no |
| Wide span version: | no |
| Rung design: | Profile unperforated |
| Surface: | other |
| Cable ladder height: | 150 mm |
| Cable ladder width: | 300 mm |
| Inner radius: | 250 mm |
| Material: | Plastic |
| Material quality: | GRP |
| RAL number: | 7032 |
| Design: | without connectors |
| Symmetrical design: | yes |
