GRP crossing, pultruded, with unperforated side rails, but with connector holes and with unperforated rungs made of C-profile that are open at the top with a slot width of approx. 15 mm, for creating horizontal 90° crossings, please order corresponding fastening accessories separately, halogen-free. The following must be observed during assembly: - When connecting the shaped piece, an assembly distance of approx. 30 mm must be taken into account. - The shaped piece must be supported with brackets at each cable ladder access. - If the radius is > 250 mm and/or the width is > 400 mm, additional central support should be provided. - To ensure correct assembly, the connectors at each cable ladder access must be screwed with 4 FKM 6X20 E4. GRP crossing with connecting straps (1) made of stainless steel on request. GRP crossing with unperforated rungs for realizing radii R600 and R900 on request. The joint connectors ULGH 100/150 and ULIH 100 E4 are not included in the scope of delivery (please order separately). Use for: GRP cable ladder UL 100... GRP cable ladder ULL 100... Dimensions (approx. dimensions) H x W : 100 x 500 mm Length in main direction : 690 mm + B Length in exit direction : 345 mm + B Radius R : 250 mm Material : UP-GF (glass fiber reinforced polyester) Screw material : stainless steel, material no. 1.4404, AISI 316L Color : pebble gray RAL : 7032 (similar)
| Property | Value |
| Design of the side rail: | Profile (open) |
| Suitable for functional integrity: | no |
| Wide span version: | no |
| Rung design: | Profile unperforated |
| Surface: | other |
| Cable ladder height: | 100 mm |
| Cable ladder width: | 500 mm |
| Inner radius: | 250 mm |
| Material: | Plastic |
| Material quality: | GRP |
| RAL number: | 7032 |
