Wide-span rail connector, right-angled, one-sided form-fitting for the wide-span rail, for connecting a vertical wide-span rail (riser rail) to a horizontal wide-span cable tray/ladder with the same rail height and for fastening the wide-span rails to the floor and wall, including appropriate stainless steel fastening accessories. The connector serves as a shift protection and requires a support point near the wall for wall connections. To ensure that the pair of protective caps can be easily fitted, the vertical wide-span cable ladder should have a rail overhang of at least 70 mm above the horizontal wide-span rail. The pair of protective caps SKWHM 150 must be installed in personal hazard areas. Equipotential bonding is achieved by screwing to the wide-span cable tray/ladder rails. Can be used for: wide span cable trays/ladders with 150 mm edge height Required: 2 pieces per connection Dimensions (approx. dimensions) form-fitting side height H (clear inside dimension): 151.5 mm Material thickness t: 2 mm Material: stainless steel, material no. 1.4301, 1.4303
| Property | Value |
| Design of the side rail: | Profile (open) |
| Suitable for functional integrity: | no |
| Wide span design: | yes |
| Surface: | other |
| Suitable for beam height: | 150 mm |
| Material: | stainless steel |
| Stainless steel, pickled: | no |
| Material quality: | rust and acid-resistant steel |
