After the successful launch of the CoreLine LED hall light in 2013, it has now been completely redesigned in its 3rd generation. The further improvement in efficiency enables a further reduction in operating costs. The light offers customers all the advantages of LED lighting - 'fresh' light quality, a very long service life and reduced power consumption and maintenance effort - from a proven manufacturer. At the same time, it offers clear advantages for the installer: The compact, robust CoreLine LED hall light can be used both in new systems and as an optimal replacement in many renovation projects instead of existing conventional hall lights with 250W/400W high-pressure discharge lamps. The electrical connection is uncomplicated: the light does not need to be opened for installation or maintenance work. In addition, it is up to 60% lighter than other LED and conventional hall lights and is therefore very easy to install.
| Property | Value |
| Suitable for number of bulbs: | 1 |
| Bulb: | LED not replaceable |
| Color temperature: | 4000 K |
| Rated luminous flux according to IEC 62722-2-1: | 20500 lm |
| Length: | 452 mm |
| Width: | 454 mm |
| Height/depth: | 107 mm |
| With bulb: | yes |
| Socket: | other |
| Operating device: | LED operating device, current-controlled |
| Protection class: | I |
| Protection type (IP): | IP65 |
| Impact resistance: | IK07 |
| Housing color: | gray |
| Nominal voltage: | 240 V |
| Max. System power: | 155 W |
| Light color: | white |
| With control gear: | yes |
| Voltage type: | AC |
| Suitable for emergency lighting: | no |
| Housing material: | aluminum |
| Mounting type: | pendicular |
| With protective cover: | no |
| Reflector material: | without reflector |
| Reflector: | without |
| Ball-proof: | no |
| Luminaire with limited surface temperature 'D-mark': | no |
| Color rendering index CRI: | 80-89 |
| Light distribution: | symmetrical |
| Suitable for secondary lamps: | no |
| Dimming 0-10 V: | no |
| Dimming 1-10 V: | no |
| Dimming DALI: | no |
| Dimming DMX: | no |
| Dimming DSI: | no |
| Dimming trailing edge phase control: | no |
| Dimming leading edge phase control: | no |
| Dimming potentiometer (integrated in device): | no |
| Dimming GPRS: | no |
| Dimming LineSwitch: | no |
| Dimming manufacturer-specific: | no |
| Dimming mains voltage modulation: | no |
| Dimming programmable: | no |
| Dimming RF: | no |
| Dimming Sine Wave Reduction: | no |
| Dimming Touch and Dim: | no |
| Dimming Zigbee: | no |
| Dimming with push button: | no |
| Without dimming function: | yes |
| Light distributor: | Focus lens |
| Beam angle: | wide beam 41-80° |
| Rated service life L70/B10 at 25 °C: | 50000 h |
| Rated service life L80/B10 at 25 °C: | 30000 h |
| Rated service life L90/B10 at 25 °C: | 15000 h |
| Glow wire test according to IEC 60695-2-11: | 650 °C - 30 s |
| Rated ambient temperature according to IEC62722-2-1: | 40 °C |
| Suitable for lamp power: | 155 W |
| Power factor: | 0.9 |
| Outer diameter: | 452 mm |
| Installation height/depth: | 107 mm |
| Type of Wiring: | Termination |
| Number of poles: | 3 |
| Conductor cross-section: | 7.5 mm |
| Connection type: | Plug terminal |
