Fulfills the CoreLine promise - innovative, easy to install and high quality. Following the success of the previous generation, an upgrade to a new generation has achieved significant improvements in efficiency with the new innovative design. With up to 145lm/W and a service life of 50,000 hours (L80), the total cost of ownership is further optimized. The compact and robust LED high bay luminaire made of aluminum is available in three sizes with 10,000/20,000/25,000 lumens. This makes it the ideal replacement for conventional high bay luminaires with 250W/400W high pressure discharge lamps. The rotationally symmetrical luminaire with single-point suspension is also smaller and lighter than conventional luminaires, which makes it very easy to handle. A pre-assembled industrial plug enables easy installation and the special lens optics ensure outstanding light distribution in two beam angles (WB/NB). The CoreLine Highbay meets IFS/HACCP requirements for the food industry. Optional DALI dimming is still available, resulting in further savings.
| Property | Value |
| Suitable for number of lamps: | 1 |
| Lamp: | LED not replaceable |
| Color temperature: | 4000 K |
| Rated luminous flux according to IEC 62722-2-1: | 20000 lm |
| Height/depth: | 95 mm |
| With lamp: | yes |
| Socket: | without |
| Operating device: | LED operating device current-controlled |
| Protection class: | I |
| Protection type (IP): | IP65 |
| Impact resistance: | IK07 |
| Housing colour: | grey |
| Nominal voltage: | 240 V |
| Max. System power: | 138 W |
| Light color: | white |
| With control gear: | yes |
| Voltage type: | AC |
| Suitable for emergency lighting: | no |
| Housing material: | aluminum |
| Mounting type: | pendicular |
| With protective cover: | no |
| Reflector material: | without reflector |
| Reflector: | without |
| Ball-proof: | no |
| Luminaire with limited surface temperature 'D-mark': | no |
| Color rendering index CRI: | 80-89 |
| Light distribution: | symmetrical |
| Suitable for secondary lamps: | no |
| LED nominal current at constant current: | 80 mA |
| Dimming 0-10 V: | no |
| Dimming 1-10 V: | no |
| Dimming DALI: | no |
| Dimming DMX: | no |
| Dimming DSI: | no |
| Dimming trailing edge: | no |
| Dimming leading edge: | no |
| Dimming potentiometer (integrated in the device): | no |
| Dimming GPRS: | no |
| Dimming LineSwitch: | no |
| Dimming manufacturer-specific: | no |
| Dimming mains voltage modulation: | no |
| Dimming programmable: | no |
| Dimming RF: | no |
| Dimming Sine Wave Reduction: | no |
| Dimming Touch and Dim: | no |
| Dimming Zigbee: | no |
| Dimming with push button: | no |
| Without dimming function: | yes |
| Light distributor: | Focus lens |
| Beam angle: | wide beam 41-80° |
| Energy efficiency class of the built-in lamp: | C |
| Rated service life L70/B50 at 25 °C: | 70000 h |
| Rated service life L80/B50 at 25 °C: | 50000 h |
| Glow wire test according to IEC 60695-2-11: | 650 °C - 30 s |
| Rated ambient temperature according to IEC62722-2-1: | 35 °C |
| Suitable for lamp power: | - W,- W |
| Power factor: | 0.95 |
| Outer diameter: | 450 mm |
| Installation height/depth: | 95 mm |
| Wiring type: | Termination |
| Number of poles: | 3 |
| Conductor cross-section: | 1 mm |
| Connection type: | Plug terminal |
