Surface-mounted mechanical room hygrostat, Used to monitor and regulate relative humidity, e.g. in business premises, apartments, conservatories, bathrooms, swimming pools, computer rooms, The effect of the relative humidity on a measuring tape activates a potential-free changeover contact, The setpoint is adjusted using the adjustment knob on the front. The setting range can be restricted , Number of outputs: 2 , Number of control ranges: 1 , Output signal 1: Humidify, switching , Output signal 2: Dehumidify, switching , Humidify: 3 (0.2) A , Dehumidify: 5 (0.2) A , Switching voltage: 24-230 VAC, 50 Hz , Min. switching current: 100 mA , Operating voltage: no auxiliary power required , Average power consumption: 0 W , Electrical connection: Screw terminals 0.5...2.5 mm2 , Housing material: ABS plastic , Sensor: Plastic fibers , Hysteresis: approx. 4% rH , Mechanical range setting , Medium: Air, non-aggressive , Mounting attachment: Surface-mounted / wall mounting (4-hole attachment on flush-mounted box Ø 55 mm) , Surface finish: matt , Potential-free , Control range: 30 - 100 % , Control function: Humidification or dehumidification , Switching element: Micro switch , Switching contact: Changeover switch (changeover contact) , Switching capacity: Terminal 4: 1150 W, Terminal 2: 690 W , Protection class: II, after appropriate installation , Safety and EMC: in accordance with DIN EN 60730 , Setpoint adjuster , Degree of contamination: 2 , Storage temperature: -20° to +60°C , Ambient temperature: +10° to +60°C , Permissible air humidity: max. 95% r. H., non-condensing , Housing dimensions: 78.3 x 25.5 x 83.4 mm , Weight: approx. 90 g , Note: Observe wet cell clearance in accordance with DIN0100-701! ,
