Flush-mounted mechanical room hygrostat with standard frame 50x50 , Used to monitor and regulate the relative humidity, e.g. in business premises, apartments, conservatories, bathrooms, swimming pools, IT rooms , The effect of the relative humidity on a measuring tape activates a potential-free changeover contact , The setpoint is set using the adjustment button on the front , Number of outputs: 2 , Number of control ranges: 1 , Output signal 1: Humidification, switching , Output signal 2: Dehumidification, switching , Protection cap , Rated impulse voltage: 4000 V , Contact protection cover , Average power consumption: 0 W , Electrical connection: Screw terminals 0.5.2.5 mm2 , Housing material: Plastic PC , Sensor: Plastic fibers , Hysteresis: approx. 5% rH , Measuring accuracy: +/- 4% rH , Storage temperature: -20° to +60°C , Switching voltage: 24-230 VAC, 50 Hz , Min. switching current: 100 mA , Max. switching current: Dehumidification (terminal E) 5 (0.2) A, Humidification (terminal B) 2 (0.2) A , Operating voltage: no auxiliary energy required , Mechanical range setting , Medium: Air, non-aggressive , Mounting fastening: in flush-mounted box Ø 55 mm - with cover set 50 x 50 mm or 55 x 55 mm can be adapted to almost all surface switch programs (deep flush-mounted box recommended) , Potential-free , Control range: 35 to 85 % , Control function: Humidification or dehumidification , Switching element: Micro switch , Switching contact: Changeover switch (changeover contact) , Switching capacity: Terminal E: 1150 W, Terminal B: 460 W , Protection type: IP30 , Protection class: II, after appropriate installation , Safety and EMC: in accordance with DIN EN 60730 , Setpoint adjuster , Ambient temperature: 0° to +50°C , Degree of pollution: 2 , Permissible humidity: max. 95% r. H., non-condensing , Housing dimensions: 81 x 44.5 x 85 mm , Weight: approx. 90 g , Color: pure white, similar to RAL 9010, glossy , Note: Observe wet room clearance in accordance with DIN0100-701! ,
