The DuoFern universal dimmer is a radio-enabled actuator
for dimming dimmable 230 V lamps. As a flush-mounted device with a low installation height, the dimmer can be installed in a standard flush-mounted box.
Automatic load detection
The DuoFern universal dimmer has automatic
detection of the connected load type (R, L and C)
and is therefore suitable for almost all dimmable lamps.
Depending on the connected load, the required dimmer operating mode is set automatically.
Manual setting of the load type and brightness
As an alternative to automatic detection of the lamp,
the load type (R, L and C) can be selected manually.
The minimum and maximum brightness can therefore be manually adjusted to each lamp.
Operation on site using an external button
The DuoFern universal dimmer can be operated on site using an external button. The DuoFern universal dimmer has a corresponding input [ E ] for connecting the external button. Supports the following functions: Fully integrated into the DuoFern radio system (HomePilot) Universal dimmer with automatic load type detection (detection works from approx. 15 W) Connection option (input) for external 230V button for on-site control. Depending on the load type, either trailing edge phase control (mode R, C) or leading edge phase control / Triac mode (mode L) Due to the high load range (up to 400 W) also suitable for old installations with halogen or incandescent lamps Time automatic, sun automatic, dusk automatic, dawn automatic, manual operation Staircase function - automatic switch-off after approx. 0.1 seconds to 54 minutes Intermediate value function via HomePilot adjustable, switched on at the factory.
Intermediate values are adopted with a stop command or by dimming with the external button (hold down).
Dimming speed for radio commands via HomePilot adjustable from 2 255 seconds
Remote registration and deregistration via HomePilot or DuoFern hand-held control unit
Property | Value |
Device height: | 45.7 mm |
Device width: | 48.5 mm |
Device depth: | 19.7 mm |
Mounting type: | Flush-mounted |
Dimming phase control: | no |
Dimming phase control: | no |
Nominal voltage: | 240 V |
Color: | black |
Suitable for protection class (IP): | IP30 |
Operating mode: | Radio |
Halogen-free: | yes |
Composition: | Basic element |
Series dimmer: | no |
Extension input: | no |
Light value memory: | no |
Can be used with button: | no |
Can be used with motion detector: | no |
Can be used with presence detector: | no |
Can be used with timer: | yes |
Can be used with radio button: | yes |
Can be used with IR button: | no |
Mounting type: | other |
Material: | plastic |
Material quality: | thermoplastic |
Surface: | untreated |
Surface finish: | matt |
Frequency: | 50 Hz |
Transparent: | no |
App control via Bluetooth: | no |