Garage door operator RP-SX5DF-900N-5 RolloPort SX DuoFern
The DuoFern garage door operator for swing and sectional doors.
Electric garage door operators are one of the pleasant conveniences of everyday life. The RolloPort SX5 DuoFern is the convenient drive solution for swing and sectional doors. In conjunction with the HomePilot Smart Home, it can be conveniently controlled via smartphone, tablet or PC using a light barrier. You can also operate it remotely using the DuoFern transmitter.
With a pulling force of 900 N and a speed of up to 19 cm/s, the RolloPort SX5 DuoFern garage door operator opens almost any door significantly faster than usual. Thanks to the 90° rotatable drive unit, the door operator offers flexible installation options. A quiet toothed belt drive ensures safe power transmission.
The RolloPort SX5 DuoFern offers extensive comfort functions such as automatic force learning, automatic door closing, soft start/soft stop, adjustable opening speed and a backjump function that relieves the load on the system and enables easier emergency release.
The RolloPort SX5 DuoFern is equipped with obstacle detection with reversing function. It has an internal emergency release for manual operation in the event of a power failure. It also offers the option of connecting an external button. The RolloPort SX5 DuoFern is supplied with two 2-channel micro handheld transmitters and an external release.
Please note: If you want to operate the RolloPort SX5 DuoFern out of sight, the light barrier available as an accessory (item no. 80000051) must be connected.
Product highlights:
With 900 N pulling force, suitable for almost all swing and sectional doors
Direct control via HomePilot®, standard handheld transmitter, multiple wall switch, etc.
Automatic safety return when approaching an obstacle
With extensive accessories: 2 micro handheld transmitters, 1 external release
Technical data
Supply voltage 220-240 V / 50, 60 Hz
Motor type 24 V (DC) direct current
Max. pulling force 900 N / 90 kg
Gate travel speed OPEN 11 / 15 / 19 cm/s + DOWN 11 cm/s
Protection class II
Operation at -10°C to +40°C
Total length 3,475 mm (3,335 mm with 90° installation of the drive head)
Max. lifting height 2,550 mm
Max. gate size 12.5 m
Minimum headroom 5 cm
Max. gate height 2,400 mm
Hand-held transmitter transmission frequency 433 MHz Rolling Code
Device transmission frequency 434.5 MHz
Max. transmission power 10 mW
Max. no. of the DuoFern devices 20
Radio range Open field approx. 100 m, in the building approx. 30 m (depending on the building structure)
Scope of delivery
1 x drive
1 x operating instructions
2 x hand-held transmitter
1 x gate connector, curved
1 x center suspension
3 x bracket
1 x lintel bracket
1 x gate bracket
1 x multi-tooth connector
8 x hexagonal self-tapping screw (6 x 15 mm)
1 x screw (6 x 80 mm) with hexagon nut and protective sleeve
1 x bolt (8 x 20 mm)
1 x locking pin (2 x 20 mm)
4 x screw (8 x 20 mm) with Hexagon nut and washer
6 x dowels (10 mm)
6 x hexagon screws (8 x 60 mm)
1 x driving pin
2 x mounting hole strip
three-part rail + two connectors
1 x external release
| Feature | Value |
| Nominal voltage: | 230 V |
| Standard travel: | 2550 mm |
| Max. pulling force: | 900 N |
| Max. Door/gate width: | 6000 mm |
| With guide rail: | yes |
| With internal button: | no |
| Separate control housing: | no |
| Suitable for gates with low headroom fittings: | no |
| Soft running: | yes |
| Frequency of the radio receiver: | 433 MHz |
| Cycle counter: | no |
| Gate status display: | no |
| Defined direction of travel control: | no |
| Red light connection: | no |
| Number of safety inputs: | 2 |
| Suitable for collective garages: | no |
| Potential-free relay output: | no |
| With hand-held transmitter: | yes |
| Max. Door/Gate weight: | 95 kg |
| With lighting: | no |
