Description
Features
Reviews
Lamp body made of deep-drawn sheet steel with foam seal and rotary lever locks, direct/indirect light distribution using an acrylic glass diffuser with opal coloring, drawn from a single piece with stable corners, including multi-lumen driver with 4 adjustable light outputs, electrical connection via 3-pin connection terminal with plug-in contact technology. Note on protection class: IP50 for ceiling and wall mounting, IP40 for mounting on a mounting rail and pendant.
| Property | Value |
| Max. System power: | 31 W |
| Rated luminous flux according to IEC 62722-2-1: | 4100 lm |
| Suitable for number of lamps: | 1 |
| Length: | 1215 mm |
| Width: | 90 mm |
| Height/depth: | 71 mm |
| Protection rating (IP): | IP50 |
| Protection class: | I |
| Luminaire with limited surface temperature 'D-mark': | no |
| Nominal voltage: | 230 V |
| Housing color: | white |
| Housing material: | steel |
| Color temperature: | 4000 K |
| Impact resistance: | IK02 |
| Color rendering index CRI: | 80-89 |
| Suitable for Ceiling mounting: | yes |
| Rated service life L80/B10 at 25 °C: | 50000 h |
| Suitable for wall mounting: | yes |
| Voltage type: | AC |
| With motion detector: | no |
| Beam angle: | medium beam 21-40° |
| With light source: | yes |
| Light source: | LED not replaceable |
| Rated ambient temperature according to IEC62722-2-1: | 25 °C |
| Socket: | other |
| Connection type: | Plug-in terminal |
| With control gear: | yes |
| Cover material: | Opal plastic |
| Light distributor: | Diffuser lens/optics/panel |
| Without dimming function: | yes |
| Light emission: | direct/indirect |
| Light distribution: | symmetrical |
| With light sensor: | no |
| Operating device: | not required |
| Suitable for recessed mounting: | no |
| Light color: | white |
| Suitable for computer workstations in accordance with EN 12464-1: | no |
| Suitable for light strip configuration: | yes |
| Suitable for pendant suspension: | yes |
| Suitable for surface mounting: | yes |
| Suitable for emergency lighting: | no |
| Design of the grid: | without |
| Covering of the luminaire with thermal insulation material possible: | no |
| DMX dimming: | no |
| DSI dimming: | no |
| With air slots: | no |
| Dimming LineSwitch: | no |
| Dimming potentiometer (device integrated): | no |
| Dimming 0-10 V: | no |
| Dimming GPRS: | no |
| Dimming 1-10 V: | no |
| Dimming manufacturer-specific: | no |
| Dimming DALI: | no |
| Dimming mains voltage modulation: | no |
| Dimming trailing edge: | no |
| Dimming leading edge: | no |
| Dimming programmable: | no |
| Dimming RF: | no |
| Dimming Sine Wave Reduction: | no |
| Dimming Touch and Dim: | no |
| Dimming Zigbee: | no |
| Dimming with push button: | no |
| Dimming depending on the operating device: | yes |
| Protection class (NEMA): | other |
| Glow wire test according to IEC 60695-2-11: | without |
| Suitable for lamp power: | 19 to 31 W |
| Luminous efficacy: | 142 lm/W |
| Type of Wiring: | Termination |
| Number of poles: | 3 |
Features
HAB
KLKF/1200 4100-2700 840 ET multi IP50
Manufacturer
HAN
21100213120
GTIN
4020863450060
Covering the luminaire with thermal insulation material possible
No
Connection type
Plug-in terminal
Type of wiring
Diploma
Execution of the grid
Without
Beam angle
Medium beam 21-40°
Rated lifetime L80/B10 at 25 °C
50000 hours
Rated luminous flux according to IEC 62722-2-1
4100lm
Rated ambient temperature according to IEC62722-2-1
25°C
Operating device
Not required
Suitable for computer workstations according to EN 12464-1
No
Width
90 mm
Dimming 0-10 V
No
Dimming 1-10 V
No
Dimming DALI
No
Dimming DMX
No
Dimming DSI
No
Dimming GPRS
No
Dimming LineSwitch
No
Dimming mains voltage modulation
No
Dimming trailing edge
No
Dimming phase control
No
Dimming potentiometer (integrated)
No
Dimming RF
No
Dimming Sine Wave Reduction
No
Dimming Touch and Dim
No
Dimming Zigbee
No
Dimming depends on the control gear
Yes
Dimming manufacturer-specific
No
Dimming with push button
No
Dimming programmable
No
Color temperature
4000K
Color rendering index CRI
80-89
Version
Other
Suitable for surface mounting
Yes
Suitable for ceiling mounting
Yes
Suitable for flush mounting
No
Suitable for lamp power
19 to 31 W
Suitable for number of lamps
1
Suitable for light strip configuration
Yes
Suitable for emergency lighting
No
Suitable for pendulum suspension
Yes
Suitable for wall mounting
Yes
Housing color
White
Glow wire test according to IEC 60695-2-11
Without
Height/Depth
71 mm
Luminaire with limited surface temperature D-mark
No
Luminaire luminous efficacy
142lm/W
Lamps
LED not replaceable
Light emission
Direct/indirect
Light color
White
Light distributor
Diffuser lens/optics/panel
Light distribution
Symmetrical
Length
1215 mm
Max. system performance
31 W
With operating device
Yes
With motion detector
No
With light source
Yes
With light sensor
No
With air slots
No
Nominal voltage
230V
Without dimming function
Yes
Number of poles
3
Impact resistance
IK02
IP protection)
IP50
Protection class (NEMA)
Other
Protection class
I
Voltage type
AC
Cover material
Plastic opal
Housing material
Steel
No reviews yet — your comment may be first.
All reviews 0
