Description
Features
Reviews
Housing made of die-cast aluminum, powder-coated, square design, tool-free connection of LED unit and LED socket according to Zhaga specification, die-cast aluminum heat sink for effective passive cooling, reflector unit gimbal-mounted, with fastening springs for tool-free installation, suitable for ceiling thicknesses of 10mm-20mm, direct, deep-beam light distribution using a high-gloss faceted reflector made of highly efficient MIRO-SILVER® aluminum with a reflection factor of 99.8%, clear safety glass pane, external driver wired for operation with luminaire. Electrical connection via 0.7m long connecting cable, 2x0.75mm²+2x0.75mm².
| Property | Value |
| Max. System power: | 36 W |
| Rated luminous flux according to IEC 62722-2-1: | 4100 lm |
| Housing color: | white |
| Housing material: | aluminum |
| Protection class (IP): | IP20 |
| Socket: | without |
| Light source: | LED not replaceable |
| Protection class: | II |
| With light source: | yes |
| Installation height/depth: | 160 mm |
| With control gear: | yes |
| Suitable for recessed mounting: | yes |
| Length: | 175 mm |
| Width: | 175 mm |
| Height/depth: | 119 mm |
| With motion detector: | no |
| Color temperature: | 3000 K |
| Nominal voltage: | 230 V |
| Suitable for lamp power: | 36 W |
| Beam angle: | medium beam 21-40° |
| Color rendering index CRI: | 80-89 |
| Suitable for ceiling mounting: | yes |
| Light distribution: | symmetrical |
| Operating device: | LED operating device, current-controlled |
| Impact resistance: | IK00 |
| Luminaire with limited surface temperature 'D-mark': | no |
| Reflector: | high-gloss |
| Suitable for number of bulbs: | 1 |
| Installation width: | 160 mm |
| Installation length: | 155 mm |
| Luminous flux: | 4100 lm |
| Cover material: | without |
| Covering of the luminaire with thermal insulation material possible: | no |
| Voltage type: | AC |
| Light color: | white |
| Suitable for track mounting: | no |
| Adjustability: | pivotable |
| Suitable for clamp mounting: | no |
| Suitable for pendulum suspension: | no |
| Suitable for podium/floor mounting: | no |
| Suitable for truss mounting: | no |
| With light sensor: | no |
| Suitable for surface mounting: | no |
| Suitable for cable system: | no |
| Surface: | powder-coated |
| Brushed surface: | no |
| Dimming depending on operating device: | yes |
| Dimming 0-10 V: | no |
| Dimming 1-10 V: | no |
| DALI dimming: | yes |
| DMX dimming: | no |
| DSI dimming: | no |
| Potentiometer dimming (integrated in the device): | no |
| GPRS dimming: | no |
| LineSwitch dimming: | no |
| Manufacturer-specific dimming: | no |
| Mains voltage modulation dimming: | no |
| Phase control dimming: | no |
| Dimming phase control: | no |
| Dimming programmable: | yes |
| Dimming RF: | no |
| Dimming Sine Wave Reduction: | no |
| Dimming Touch and Dim: | no |
| Dimming Zigbee: | no |
| Dimming with push button: | no |
| Without dimming function: | no |
| Light distributor: | other |
| Light emission: | direct |
| Protection class (NEMA): | other |
| Rated ambient temperature according to IEC62722-2-1: | 25 °C |
| Wiring type: | Termination |
| Number of poles: | 4 |
| Connection type: | other |
| Luminaire luminous efficacy: | 114 lm/W |
| Suitable for computer workstations according to EN 12464-1: | yes |
| Glow wire test according to IEC 60695-2-11: | without |
| Photobiological safety according to EN 62471: | other |
| Color consistency (McAdam ellipse): | SDCM3 |
Features
HAB
Rotara-ROEQT/160 4100lm 830 DALI SK2
Manufacturer
HAN
37580056630
GTIN
4020863343591
Covering the luminaire with thermal insulation material possible
No
Connection type
Other
Type of wiring
Diploma
Beam angle
Medium beam 21-40°
Rated luminous flux according to IEC 62722-2-1
4100lm
Rated ambient temperature according to IEC62722-2-1
25°C
Operating device
LED control gear current controlled
Suitable for computer workstations according to EN 12464-1
Yes
Width
175 mm
Dimming 0-10 V
No
Dimming 1-10 V
No
Dimming DALI
Yes
Dimming DMX
No
Dimming DSI
No
Dimming GPRS
No
Dimming LineSwitch
No
Dimming mains voltage modulation
No
Dimming trailing edge
No
Dimming phase control
No
Dimming potentiometer (integrated)
No
Dimming RF
No
Dimming Sine Wave Reduction
No
Dimming Touch and Dim
No
Dimming Zigbee
No
Dimming depends on the control gear
Yes
Dimming manufacturer-specific
No
Dimming with push button
No
Dimming programmable
Yes
Installation width
160 mm
Installation height/depth
160 mm
Installation length
155 mm
Color consistency (McAdam ellipse)
SDCM3
Color temperature
3000K
Color rendering index CRI
80-89
Version
Without
Suitable for surface mounting
No
Suitable for ceiling mounting
Yes
Suitable for flush mounting
Yes
Suitable for clamp mounting
No
Suitable for lamp power
36W
Suitable for number of lamps
1
Suitable for pendulum suspension
No
Suitable for podium/floor mounting
No
Suitable for rope system
No
Suitable for busbar mounting
No
Suitable for truss mounting
No
Housing color
White
Glow wire test according to IEC 60695-2-11
Without
Height/Depth
119 mm
Luminaire with limited surface temperature D-mark
No
Luminaire luminous efficacy
114lm/W
Lamps
LED not replaceable
Light emission
Direct
Light color
White
Luminous flux
4100lm
Light distributor
Other
Light distribution
Symmetrical
Length
175 mm
Max. system performance
36W
With operating device
Yes
With motion detector
No
With light source
Yes
With light sensor
No
Nominal voltage
230V
Surface
Powder coated
Brushed surface
No
Without dimming function
No
Photobiological safety according to EN 62471
Other
Number of poles
4
Reflector
High gloss
Impact resistance
IK00
IP protection)
IP20
Protection class (NEMA)
Other
Protection class
II
Voltage type
AC
Adjustability
Swiveling
Cover material
Without
Housing material
Aluminum
No reviews yet — your comment may be first.
All reviews 0
