Extremely flat luminaire housing designed by BUSSE Design+Engineering GmbH, extruded aluminum profile, natural anodized, visible height 23mm, rounded front sides, natural anodized aluminum, high stability due to cross braces made of stainless steel, direct/indirect light distribution, direct component by means of microprism panel made of PMMA, indirect component and longitudinally structured illuminated side surfaces via cover made of satin polycarbonate film as dust protection, high luminous flux package with direct and indirect components in a luminous flux ratio of 2:1, light color neutral white (840) in the direct and indirect components with very good color consistency and high color rendering Ra > 80, for computer workstations, 65° < 3000cd/m² all-round glare protection according to the current standard DIN-EN 12464-1, master luminaire variant LC01 with built-in control unit and sensor for daylight and presence-dependent control of up to 15 alvia slave luminaires DALI, Electrical connection via integrated transparent connecting cable 5x0.75mm. Suspension included. Pendulum length max. 1900mm. Functions: Light control with app connection via Bluetooth, free app for IOS and Android available in the App Store, on/off, manual dimming and setpoint setting using standard buttons, daylight-dependent control, presence function. System components used: Control unit LC-OM DALIecoBT, light and presence sensor LC-OM DALI LS/PD LI. Connection of up to three additional sensors possible. Luminaires with sensor, to extend the presence area, on request. Description see chapter Advanced Services.
| Property | Value |
| Max. System power: | 56 W |
| Rated luminous flux according to IEC 62722-2-1: | 8600 lm |
| Color temperature: | 3000 K |
| Length: | 1424 mm |
| Width: | 309 mm |
| Socket: | without |
| Suitable for number of bulbs: | 1 |
| Height/depth: | 41 mm |
| Protection rating (IP): | IP20 |
| Protection class: | I |
| Pendant length: | 150 to 1900 mm |
| Operating device: | LED operating device, current-controlled |
| Material of the housing: | Aluminum |
| Suitable for computer workstations in accordance with EN 12464-1: | yes |
| With light source: | yes |
| With operating device: | yes |
| Nominal voltage: | 230 V |
| Suspension included: | yes |
| Cover material: | Structured plastic |
| Light source: | LED not replaceable |
| Housing color: | aluminum |
| Design of the grid: | without |
| Reflector: | without |
| Suitable for light strip configuration: | no |
| Direct/indirect components separately adjustable: | no |
| Light distribution: | symmetrical |
| Light emission: | direct/indirect |
| Impact resistance: | IK03 |
| Luminaire with limited surface temperature 'D-mark': | no |
| Color rendering index CRI: | 80-89 |
| Suitable for emergency lighting: | no |
| Light color: | white |
| Voltage type: | AC |
| Dimming 0-10 V: | no |
| Dimming 1-10 V: | no |
| Dimming DALI: | yes |
| Dimming DMX: | no |
| Dimming programmable: | yes |
| Dimming DSI: | no |
| Dimming RF: | no |
| Dimming potentiometer (device-integrated): | no |
| Dimming GPRS: | no |
| Dimming LineSwitch: | no |
| Dimming manufacturer-specific: | yes |
| Dimming mains voltage modulation: | no |
| Dimming trailing edge: | no |
| Dimming leading edge: | no |
| Dimming Sine Wave Reduction: | no |
| Dimming Touch and Dim: | no |
| Dimming Zigbee: | no |
| Dimming with push button: | no |
| Rated service life L80/B10 at 25 °C: | 50000 h |
| Without dimming function: | no |
| Light distributor: | other |
| Protection class (NEMA): | other |
| Glow wire test according to IEC 60695-2-11: | without |
| Suitable for lamp power: | 56 W |
| Wiring type: | Termination |
| Number of poles: | 5 |
| Conductor cross-section: | 0.75 mm² |
| Connection type: | other |
