Particularly flat luminaire housing, extruded aluminum profile, naturally anodized, visible height 30mm, front sides and side parts made of naturally anodized aluminum with a continuous longitudinal groove, rounded towards the underside of the luminaire. Direct/indirect light distribution, direct component using a microprism panel made of PMMA, homogeneous light emission through lateral LED light coupling and an aluminum reflector with a highly reflective white coating, with micro-perforations for the indirect light component, for computer workstations, all-round glare protection in accordance with the current DIN-EN 12464-1 standard. LED driver design integrated. Variant LC01: Variant master luminaire LC01 with built-in control unit and sensor for daylight and presence-dependent control of up to 31 DALI slave luminaires, wired ready for connection via a 7-pin connection terminal using plug-in contact technology. Functions: Light control with app connection via Bluetooth, free app for IOS and Android available in the App Store, on/off, manual dimming and setpoint setting using standard buttons, daylight-dependent control, presence function. System components used: LC-OM DALIecoBT control unit, LC-OM DALI LS/PD LI light and presence sensor. Connection of up to three additional sensors possible. Luminaires with sensor, to extend the presence area, on request. For description, see the Advanced Services chapter.
| Property | Value |
| Max. System power: | 55 W |
| Rated luminous flux according to IEC 62722-2-1: | 6300 lm |
| Color temperature: | 4000 K |
| Length: | 1480 mm |
| Width: | 330 mm |
| Socket: | without |
| Suitable for number of bulbs: | 1 |
| Height/depth: | 30 mm |
| Protection rating (IP): | IP20 |
| Protection class: | I |
| Pendant length: | 150 to 1900 mm |
| Operating device: | LED operating device, current-controlled |
| Material of the housing: | Aluminum |
| Suitable for computer workstations in accordance with EN 12464-1: | yes |
| With light source: | yes |
| With operating device: | yes |
| Nominal voltage: | 230 V |
| Suspension included: | yes |
| Cover material: | Structured plastic |
| Light source: | LED not replaceable |
| Housing color: | aluminum |
| Design of the grid: | without |
| Reflector: | without |
| Suitable for light strip configuration: | no |
| Direct/indirect components separately adjustable: | no |
| Light distribution: | symmetrical |
| Light emission: | direct/indirect |
| Impact resistance: | IK03 |
| Luminaire with limited surface temperature 'D-mark': | no |
| Color rendering index CRI: | 80-89 |
| Suitable for emergency lighting: | no |
| Light color: | white |
| Voltage type: | AC |
| Dimming 0-10 V: | no |
| Dimming 1-10 V: | no |
| Dimming DALI: | yes |
| Dimming DMX: | no |
| Dimming programmable: | yes |
| Dimming DSI: | no |
| Dimming RF: | no |
| Dimming potentiometer (device-integrated): | no |
| Dimming GPRS: | no |
| Dimming LineSwitch: | no |
| Dimming manufacturer-specific: | yes |
| Dimming mains voltage modulation: | no |
| Dimming trailing edge: | no |
| Dimming leading edge: | no |
| Dimming Sine Wave Reduction: | no |
| Dimming Touch and Dim: | no |
| Dimming Zigbee: | no |
| Dimming with push button: | no |
| Rated service life L80/B10 at 25 °C: | 50000 h |
| Without dimming function: | no |
| Light distributor: | other |
| Protection class (NEMA): | other |
| Glow wire test according to IEC 60695-2-11: | without |
| Suitable for lamp power: | 55 W |
| Wiring type: | Termination |
| Number of poles: | 7 |
| Connection type: | Plug terminal |
