Description
Features
Reviews
Housing made of polycarbonate, injection-molded, translucent with a patented labyrinth profile, without additional seal (age-resistant), two external fastening clips made of V2A, adjustable to compensate for the drill hole, clip-free tray fastening, impact resistance > 6 Nm, easy-to-clean housing surface, direct/indirect light distribution, glare-free thanks to diffusely radiating coating in a satin look, electrical connection via a 3-pin connection terminal with plug-in contact technology.
| Property | Value |
| Max. System power: | 47 W |
| Rated luminous flux according to IEC 62722-2-1: | 6300 lm |
| Suitable for number of lamps: | 1 |
| Length: | 1563 mm |
| Width: | 158 mm |
| Height/depth: | 76 mm |
| Protection rating (IP): | IP55 |
| Protection class: | I |
| Luminaire with limited surface temperature 'D-mark': | yes |
| Nominal voltage: | 230 V |
| Housing material: | plastic |
| Color temperature: | 4000 K |
| Impact resistance: | IK03 |
| Color rendering index CRI: | 80-89 |
| Suitable for ceiling mounting: | yes |
| Rated service life L80/B10 at 25 °C: | 50000 h |
| Suitable for wall mounting: | no |
| Voltage type: | AC |
| With motion detector: | no |
| Beam angle: | medium beam 21-40° |
| With light source: | yes |
| Light source: | LED not replaceable |
| Rated ambient temperature according to IEC62722-2-1: | 25 °C |
| Socket: | other |
| Connection type: | plug-in terminal |
| With operating device: | yes |
| Cover material: | plastic opal |
| Light distributor: | Diffuser lens/optics/panel |
| Without dimming function: | yes |
| Light emission: | direct/indirect |
| Light distribution: | symmetrical |
| With light sensor: | no |
| Operating device: | LED operating device, current-controlled |
| Suitable for recessed mounting: | no |
| Light color: | white |
| Suitable for computer workstations in accordance with EN 12464-1: | no |
| Suitable for Light strip configuration: | no |
| Suitable for pendant suspension: | no |
| Suitable for surface mounting: | yes |
| Suitable for emergency lighting: | no |
| Design of the grid: | without |
| Covering of the luminaire with thermal insulation material possible: | no |
| DMX dimming: | no |
| DSI dimming: | no |
| With air slots: | no |
| LineSwitch dimming: | no |
| Dimming potentiometer (integrated in the device): | no |
| Dimming 0-10 V: | no |
| Dimming GPRS: | no |
| Dimming 1-10 V: | no |
| Dimming manufacturer-specific: | no |
| Dimming DALI: | no |
| Dimming mains voltage modulation: | no |
| Dimming trailing edge: | no |
| Dimming leading edge: | no |
| Dimming programmable: | no |
| Dimming RF: | no |
| Dimming Sine Wave Reduction: | no |
| Dimming Touch and Dim: | no |
| Dimming Zigbee: | no |
| Dimming with push button: | no |
| Dimming dependent on operating device: | yes |
| Protection class (NEMA): | other |
| Glow wire test according to IEC 60695-2-11: | without |
| Suitable for lamp power: | 47 W |
| Luminaire luminous efficacy: | 133 lm/W |
| Wiring type: | Termination |
| Number of poles: | 3 |
Features
HAB
Peanut corridor-AGI/1500 840 IP55 tz
Manufacturer
HAN
52610094180
GTIN
4020863363315
Covering the luminaire with thermal insulation material possible
No
Connection type
Plug-in terminal
Type of wiring
Diploma
Execution of the grid
Without
Beam angle
Medium beam 21-40°
Rated lifetime L80/B10 at 25 °C
50000 hours
Rated luminous flux according to IEC 62722-2-1
6300lm
Rated ambient temperature according to IEC62722-2-1
25°C
Operating device
LED control gear current controlled
Suitable for computer workstations according to EN 12464-1
No
Width
158 mm
Dimming 0-10 V
No
Dimming 1-10 V
No
Dimming DALI
No
Dimming DMX
No
Dimming DSI
No
Dimming GPRS
No
Dimming LineSwitch
No
Dimming mains voltage modulation
No
Dimming trailing edge
No
Dimming phase control
No
Dimming potentiometer (integrated)
No
Dimming RF
No
Dimming Sine Wave Reduction
No
Dimming Touch and Dim
No
Dimming Zigbee
No
Dimming depends on the control gear
Yes
Dimming manufacturer-specific
No
Dimming with push button
No
Dimming programmable
No
Color temperature
4000K
Color rendering index CRI
80-89
Version
Other
Suitable for surface mounting
Yes
Suitable for ceiling mounting
Yes
Suitable for flush mounting
No
Suitable for lamp power
47W
Suitable for number of lamps
1
Suitable for light strip configuration
No
Suitable for emergency lighting
No
Suitable for pendulum suspension
No
Suitable for wall mounting
No
Glow wire test according to IEC 60695-2-11
Without
Height/Depth
76 mm
Luminaire with limited surface temperature D-mark
Yes
Luminaire luminous efficacy
133lm/W
Lamps
LED not replaceable
Light emission
Direct/indirect
Light color
White
Light distributor
Diffuser lens/optics/panel
Light distribution
Symmetrical
Length
1563 mm
Max. system performance
47W
With operating device
Yes
With motion detector
No
With light source
Yes
With light sensor
No
With air slots
No
Nominal voltage
230V
Without dimming function
Yes
Number of poles
3
Impact resistance
IK03
IP protection)
IP55
Protection class (NEMA)
Other
Protection class
I
Voltage type
AC
Cover material
Plastic opal
Housing material
Plastic
No reviews yet — your comment may be first.
All reviews 0
