Sheet steel housing, rectangular cross-section, suitable for use in clean rooms and clean room areas in accordance with DIN 14644-1, manufactured in accordance with IPA specifications and the GMP (Good Manufacturing Practice) quality assurance guidelines, direct light distribution using a reflection-enhanced MIRO® aluminum parabolic louvre with a satin finish anodized finish, for computer workstations, all-round glare protection in accordance with the current DIN-EN 12464-1 standard. With clear cover made of laminated safety glass, integrated LED driver design. Electrical connection and connection of the control cable via a 5-pin connection terminal with plug-in contact technology. The aduna clean room light is suitable for direct current (0/50Hz), additional marking must be provided for emergency lights.
Property | Value |
Max. System power: | 59 W |
Rated luminous flux according to IEC 62722-2-1: | 7300 lm |
Suitable for number of lamps: | 1 |
Length: | 597 mm |
Width: | 597 mm |
Height/depth: | 75 mm |
Protection rating (IP): | IP65 |
Protection class: | I |
Luminaire with limited surface temperature 'D-mark': | yes |
Nominal voltage: | 230 V |
Housing color: | white |
Housing material: | steel |
Color temperature: | 5000 K |
Impact resistance: | IK07 |
Color rendering index CRI: | 80-89 |
Suitable for ceiling mounting: | yes |
Rated service life L80/B10 at 25 °C: | 500000 h |
Suitable for wall mounting: | no |
Voltage type: | AC |
With motion detector: | no |
Beam angle: | medium beam 21-40° |
With light source: | yes |
Light source: | LED not replaceable |
Rated ambient temperature according to IEC62722-2-1: | -20 to 35 °C |
Socket: | other |
Connection type: | plug-in terminal |
With operating device: | yes |
Material of Cover: | other |
Light distributor: | other |
Without dimming function: | no |
Light emission: | direct |
Light distribution: | symmetrical |
With light sensor: | no |
Operating device: | LED operating device, current-controlled |
Suitable for recessed mounting: | yes |
Light color: | white |
Suitable for computer workstations in accordance with EN 12464-1: | yes |
Suitable for Light strip configuration: | yes |
Suitable for pendant suspension: | no |
Suitable for surface mounting: | yes |
Suitable for emergency lighting: | no |
Design of the grid: | matt |
Covering of the luminaire with thermal insulation material possible: | no |
DMX dimming: | no |
DSI dimming: | no |
With air slots: | no |
LineSwitch dimming: | no |
Dimming potentiometer (integrated in the device): | no |
Dimming 0-10 V: | no |
Dimming GPRS: | no |
Dimming 1-10 V: | no |
Dimming manufacturer-specific: | no |
Dimming DALI: | yes |
Dimming mains voltage modulation: | no |
Dimming trailing edge: | no |
Dimming leading edge: | no |
Dimming programmable: | yes |
Dimming RF: | no |
Dimming Sine Wave Reduction: | no |
Dimming Touch and Dim: | no |
Dimming Zigbee: | no |
Dimming with push button: | no |
Dimming dependent on operating device: | yes |
Rated service life L90/B10 at 25 °C: | 37000 h |
Protection class (NEMA): | other |
Glow wire test according to IEC 60695-2-11: | without |
Suitable for lamp power: | 59 W |
Luminaire luminous efficacy: | 124 lm/W |
Type of wiring: | Termination |
Number of poles: | 5 |