Recessed downlight diameter 150 mm with RIDI LED module and passive heat sink, consisting of reflector housing and device carrier. Sturdy aluminum plate with tool-free fastening clips for ceiling installation. Light engine with functional module made of white polycarbonate attached underneath, for holding the reflector via bayonet lock. Diffuser made of transparent, satin-finished polycarbonate on the inside to protect the LEDs. Highly efficient RIDI LED module equipped with mid-power LEDs for uniform illumination and maximum efficiency. Driver as an independent device with mains connection terminal, cable strain relief and connection cable to the LED module. Luminaire suitable for use in emergency lighting systems. Protection class on the room side IP44, on the ceiling side IP20. Protection class I. Note: Connection terminals for one cable max. 1.5 mm. For through-wiring from luminaire to luminaire, the accessories, connection cables and T-connectors must be ordered separately. Diameter 150 mm. White reflector (similar to RAL9016, reflection-enhanced), made of polycarbonate. Installation: fastening clips for clamp thicknesses from 0 to 20 mm pre-mounted on the luminaire housing as standard.
| Property | Value |
| Max. System power: | 8 W |
| Rated luminous flux according to IEC 62722-2-1: | 1110 lm |
| Housing color: | white |
| Housing material: | plastic |
| Protection class (IP): | IP20 |
| Outer diameter: | 150 mm |
| Light source: | LED not replaceable |
| Protection class: | I |
| With light source: | yes |
| Installation height/depth: | 60 mm |
| With operating device: | yes |
| Suitable for recessed mounting: | yes |
| Height/depth: | 55 mm |
| With motion detector: | no |
| Color temperature: | 4000 K |
| Nominal voltage: | 220 to 240 V |
| Suitable for lamp power: | 8 W |
| Color rendering index CRI: | 80-89 |
| Suitable for ceiling mounting: | no |
| Light distribution: | symmetrical |
| Operating device: | LED operating device current-controlled |
| Impact resistance: | IK07 |
| Luminaire with limited surface temperature 'D-mark': | no |
| Reflector: | white |
| Suitable for number of bulbs: | 1 |
| Voltage type: | AC/DC |
| Light color: | white |
| Suitable for track mounting: | no |
| Adjustability: | not adjustable |
| Suitable for clamp mounting: | no |
| Suitable for pendulum suspension: | no |
| Suitable for podium/floor mounting: | no |
| Suitable for truss mounting: | no |
| With light sensor: | no |
| Suitable for surface mounting: | no |
| Suitable for cable system: | no |
| Brushed surface: | yes |
| Dimming depending on operating device: | yes |
| Dimming 0-10 V: | no |
| Dimming 1-10 V: | no |
| Dimming DALI: | no |
| Dimming DMX: | no |
| Dimming DSI: | no |
| Dimming potentiometer (device integrated): | no |
| Dimming GPRS: | no |
| Dimming LineSwitch: | no |
| Dimming manufacturer-specific: | no |
| Dimming mains voltage modulation: | no |
| Dimming trailing edge: | no |
| Dimming leading edge: | no |
| Dimming programmable: | no |
| Dimming RF: | no |
| Dimming Sine Wave Reduction: | no |
| Dimming Touch and Dim: | no |
| Dimming Zigbee: | no |
| Dimming with push button: | no |
| Without dimming function: | yes |
| Light emission: | direct |
| Luminous efficiency: | 126 lm/W |
| Suitable for computer workstations according to EN 12464-1: | no |
| Color consistency (McAdam ellipse): | SDCM3 |
