Recessed downlight diameter 150 mm with LED module, consisting of reflector housing and device carrier. Equipped with RIDI LED module, 1100 and 2000 lumens with passive heat sink. Protection class on the room side IP40, on the ceiling side IP20. Note LABS: These lights are suitable for use in paint processing companies outside the painting area or outside solvent processing areas. Diameter 150 mm. White reflector, made of pure aluminum, powder-coated similar to RAL9016, reflection-enhanced. Reflector housing: Stable mounting ring made of die-cast metal with tool-free fastening clips for ceiling installation and reflector holding clips. Integrated holding device for tool-free mounting of the decorative ring or accessories. Decorative ring made of white polycarbonate with bayonet lock. Function module made of white polycarbonate, for holding the reflector via bayonet lock. Diffuser made of transparent polycarbonate with a satin finish on the inside to protect the LEDs, clipped into the function module (opal diffuser available on request). Device carrier: Device carrier plate made of galvanized sheet steel, carries the operating device, the mains connection terminal with cable strain relief and the connecting cable to the LED module. Cover made of thermally resistant polycarbonate, clipped on. Device carrier for emergency light version 90 mm high. Installation: In addition to the standard fastening clips for clamp thicknesses from 0 to 25 mm, special fastening sets such as panel installation kits, reinforcement plates, concrete pouring pots, plastering rings, angled and semi-recessed kits are available as accessories.
| Property | Value |
| Max. System power: | 16 W |
| Rated luminous flux according to IEC 62722-2-1: | 2037 lm |
| Housing color: | white |
| Housing material: | steel |
| Protection class (IP): | IP20 |
| Outer diameter: | 150 mm |
| Light source: | LED not replaceable |
| Protection class: | I |
| With light source: | yes |
| Installation diameter: | 135 mm |
| Installation height/depth: | 105 mm |
| With control gear: | yes |
| Suitable for recessed mounting: | yes |
| Height/depth: | 85 mm |
| With motion detector: | no |
| Color temperature: | 4000 K |
| Nominal voltage: | 230 to 240 V |
| Suitable for lamp power: | 14 W |
| Color rendering index CRI: | 80-89 |
| Suitable for ceiling mounting: | no |
| Light distribution: | symmetrical |
| Operating device: | LED operating device current-controlled |
| Luminaire with limited surface temperature 'D-mark': | no |
| Reflector: | white |
| Suitable for number of bulbs: | 1 |
| Cover material: | without |
| Voltage type: | AC/DC |
| Light color: | white |
| Suitable for track mounting: | no |
| Adjustability: | not adjustable |
| Suitable for clamp mounting: | no |
| Suitable for pendulum suspension: | no |
| Suitable for platform/floor mounting: | no |
| Suitable for traverse mounting: | no |
| With light sensor: | no |
| Suitable for surface mounting: | no |
| Suitable for cable system: | no |
| Surface: | powder-coated |
| Brushed surface: | yes |
| Dimming depending on the operating device: | yes |
| Dimming 0-10 V: | no |
| Dimming 1-10 V: | no |
| Dimming DALI: | yes |
| Dimming DMX: | no |
| Dimming DSI: | no |
| Dimming potentiometer (integrated in the device): | no |
| Dimming GPRS: | no |
| Dimming LineSwitch: | no |
| Dimming manufacturer-specific: | no |
| Dimming mains voltage modulation: | no |
| Dimming trailing edge: | no |
| Dimming leading edge: | no |
| Dimming programmable: | no |
| Dimming RF: | no |
| Dimming Sine Wave Reduction: | no |
| Dimming Touch and Dim: | no |
| Dimming Zigbee: | no |
| Dimming with push button: | no |
| Without dimming function: | no |
| Light output: | direct |
| Luminous efficacy: | 127 lm/W |
| Suitable for computer workstations according to EN 12464-1: | no |
| Colour consistency (McAdam ellipse): | SDCM3 |
