Recessed downlight diameter 235 mm with LED module, consisting of reflector housing and device carrier. Equipped with RIDI LED module, 2000, 3000, 4000 and 5000 lumens with passive heat sink. Protection class room side IP40, ceiling side IP20. Diameter 235 mm. Matt reflector, made of piece-anodized pure aluminum, narrow beam. Reflector housing: Stable mounting ring made of die-cast metal with tool-free fastening clips for ceiling installation and reflector holding clips. Integrated holding device for tool-free attachment of the decorative ring or accessories. Decorative ring made of white polycarbonate with bayonet lock. Function module made of white polycarbonate, for holding the reflector via bayonet lock. Diffuser made of transparent polycarbonate with satin finish on the inside to protect the LEDs, clipped into the function module (opal diffuser available on request). Device carrier: Device carrier plate made of galvanized sheet steel, carries the operating device, the mains connection plug-in terminal with cable strain relief and the connecting cable to the LED module. Cover made of thermally resistant polycarbonate clipped on. Device carrier for emergency light version 90 mm high. Installation: In addition to the standard fastening clamps for clamp thicknesses from 0 to 40 mm, special fastening sets such as panel installation kits, reinforcement plates, concrete pouring pots, plaster rings, angled and semi-recessed kits are available as accessories.
Property | Value |
Max. System power: | 23 W |
Rated luminous flux according to IEC 62722-2-1: | 2930 lm |
Housing color: | white |
Housing material: | steel |
Protection class (IP): | IP20 |
Outer diameter: | 235 mm |
Light source: | LED not replaceable |
Protection class: | I |
With light source: | yes |
Installation height/depth: | 200 mm |
With operating device: | yes |
Suitable for recessed mounting: | yes |
Height/depth: | 195 mm |
With motion detector: | no |
Color temperature: | 4000 K |
Nominal voltage: | 220 to 240 V |
Suitable for lamp power: | 20 W |
Color rendering index CRI: | 80-89 |
Suitable for ceiling mounting: | no |
Light distribution: | symmetrical |
Operating device: | LED operating device current-controlled |
Luminaire with limited surface temperature 'D-mark': | no |
Reflector: | matt |
Suitable for number of bulbs: | 1 |
Cover material: | without |
Voltage type: | AC/DC |
Light color: | white |
Suitable for track mounting: | no |
Adjustability: | not adjustable |
Suitable for clamp mounting: | no |
Suitable for pendulum suspension: | no |
Suitable for platform/floor mounting: | no |
Suitable for truss mounting: | no |
With light sensor: | no |
Suitable for surface mounting: | no |
Suitable for cable system: | no |
Surface: | galvanized |
Brushed surface: | yes |
Dimming depending on operating device: | yes |
Dimming 0-10 V: | no |
Dimming 1-10 V: | no |
Dimming DALI: | yes |
Dimming DMX: | no |
Dimming DSI: | no |
Dimming potentiometer (device integrated): | no |
Dimming GPRS: | no |
Dimming LineSwitch: | no |
Dimming manufacturer-specific: | no |
Dimming mains voltage modulation: | no |
Dimming trailing edge: | no |
Dimming leading edge: | no |
Dimming programmable: | no |
Dimming RF: | no |
Dimming Sine Wave Reduction: | no |
Dimming Touch and Dim: | no |
Dimming Zigbee: | no |
Dimming with push button: | no |
Without dimming function: | no |
Light emission: | direct |
Luminous efficiency: | 127 lm/W |
Suitable for computer workstations in accordance with EN 12464-1: | yes |
Color consistency (McAdam ellipse): | SDCM3 |