Square recessed downlight with edge length 235 mm with LED module, consisting of reflector housing and device carrier. Equipped with RIDI LED module, 2000, 3000, 4000 and 5000 lumens with passive heat sink. Protection class room side IP40, ceiling side IP20. Edge length 235 mm. Reflector made of reflection-enhanced, matt anodized pure aluminum with silver coating, wide beam. Reflector housing: Stable installation frame made of galvanized sheet steel with tool-free fastening clips for ceiling installation. Installation frame for tool-free mounting of the decorative frame or accessories (to be ordered separately). Decorative frame with tool-free assembly (accessory, to be ordered separately). Function module made of white polycarbonate, for holding the reflector via bayonet lock. Diffuser made of transparent polycarbonate with a satin finish on the inside to protect the LEDs, clipped into the function module (opal diffuser available on request). Device carrier: Device carrier plate made of galvanized sheet steel, carries the operating device, the mains connection terminal with cable strain relief and the connecting cable to the LED module. Cover made of thermally resistant polycarbonate, clipped on. Device carrier for emergency light version 90 mm high. Installation: Standard fastening clips for clamp thicknesses from 0 to 40 mm. Other clamp thicknesses or fastening sets for special ceilings on request.
Property | Value |
Max. System power: | 16 W |
Rated luminous flux according to IEC 62722-2-1: | 2022 lm |
Housing color: | white |
Housing material: | steel |
Protection class (IP): | IP20 |
Light source: | LED not replaceable |
Protection class: | I |
With light source: | yes |
Installation height/depth: | 140 mm |
With operating device: | yes |
Suitable for recessed mounting: | yes |
Length: | 235 mm |
Width: | 235 mm |
Height/depth: | 137 mm |
With motion detector: | no |
Color temperature: | 3000 K |
Nominal voltage: | 230 to 240 V |
Suitable for lamp power: | 14 W |
Color rendering index CRI: | 80-89 |
Suitable for ceiling mounting: | no |
Light distribution: | symmetrical |
Operating device: | LED operating device current-controlled |
Luminaire with limited surface temperature 'D-mark': | no |
Reflector: | matt |
Suitable for number of bulbs: | 1 |
Installation width: | 207 mm |
Installation length: | 207 mm |
Cover material: | without |
Voltage type: | AC |
Light color: | white |
Suitable for track mounting: | no |
Adjustability: | not adjustable |
Suitable for clamp mounting: | no |
Suitable for pendulum suspension: | no |
Suitable for platform/floor mounting: | no |
Suitable for traverse mounting: | no |
With light sensor: | no |
Suitable for surface mounting: | no |
Suitable for cable system: | no |
Surface: | galvanized |
Brushed surface: | yes |
Dimming depending on the operating device: | yes |
Dimming 0-10 V: | no |
Dimming 1-10 V: | no |
Dimming DALI: | yes |
Dimming DMX: | no |
Dimming DSI: | no |
Dimming potentiometer (device integrated): | no |
Dimming GPRS: | no |
Dimming LineSwitch: | no |
Dimming manufacturer-specific: | no |
Dimming mains voltage modulation: | no |
Dimming trailing edge: | no |
Dimming leading edge: | no |
Dimming programmable: | no |
Dimming RF: | no |
Dimming Sine Wave Reduction: | no |
Dimming Touch and Dim: | no td> |
Dimming Zigbee: | no |
Dimming with push button: | no |
Without dimming function: | no |
Light emission: | direct |
Luminaire luminous efficacy: | 126 lm/W |
Suitable for computer workstations according to EN 12464-1: | yes |
Color consistency (McAdam ellipse): | SDCM3 |