Single light for ceiling or pendant mounting. Light housing made of torsion-resistant profiled sheet steel, white or silver (SI) resin-coated, with attached plastic end pieces. End pieces with breakout openings 3x 10 mm and 1x 10 mm x 20 mm for front-side cable entry. Reflector made of sheet steel, white resin-coated, to increase efficiency and to cover the electrical components. All-round seal between the cover and light housing, depending on the protection class. Sealing spacer to seal the fastening opening between the ceiling and light housing. Cover fastening without tools thanks to integrated retaining clips in the light housing. For RIDI-TUBE lamps (to be ordered separately). Extruded plastic cover made of opal, UV-stabilized polycarbonate (PC) with welded-on injection-molded end caps. For RIDI-TUBE lamps. Installation: Direct ceiling mounting without additional accessories. Pendulum mounting with appropriate fastening sets ZSP...LF-T16-S.
| Property | Value |
| Max. System power: | 30 W |
| Rated luminous flux according to IEC 62722-2-1: | 2816 lm |
| Suitable for number of lamps: | 2 |
| Length: | 598 mm |
| Width: | 85 mm |
| Height/depth: | 72 mm |
| Protection rating (IP): | IP64 |
| Protection class: | I |
| Luminaire with limited surface temperature 'D-mark': | yes |
| Nominal voltage: | 230 to 240 V |
| Housing color: | white |
| Housing material: | steel |
| Impact resistance: | IK07 |
| Color rendering index CRI: | 80-89 |
| Suitable for ceiling mounting: | yes |
| Suitable for wall mounting: | no |
| Voltage type: | AC |
| With motion detector: | no |
| With light source: | no |
| Light source: | LED replaceable |
| Socket: | other |
| With operating device: | yes |
| Cover material: | Plastic transparent |
| Without Dimming function: | no |
| Light emission: | direct |
| Light distribution: | symmetrical |
| With light sensor: | no |
| Operating device: | LED operating device, current-controlled |
| Suitable for recessed mounting: | no |
| Light color: | white |
| Suitable for computer workstations in accordance with EN 12464-1: | no |
| Suitable for strip light configuration: | no |
| Suitable for pendant suspension: | yes |
| Suitable for surface mounting: | no |
| Suitable for emergency lighting: | yes |
| DMX dimming: | no |
| DSI dimming: | no |
| With air slots: | no |
| LineSwitch dimming: | no |
| Dimming potentiometer (integrated in the device): | no |
| Dimming 0-10 V: | no |
| Dimming GPRS: | no |
| Dimming 1-10 V: | no |
| Dimming manufacturer-specific: | no |
| Dimming DALI: | yes |
| Dimming mains voltage modulation: | no |
| Dimming phase control: | no |
| Dimming phase control: | no |
| Dimming programmable: | no |
| Dimming RF: | no |
| Dimming Sine Wave Reduction: | no |
| Dimming Touch and Dim: | no |
| Dimming Zigbee: | no |
| Dimming with push button: | no |
| Dimming depending on the operating device: | yes |
| Suitable for lamp power: | 15 W |
| Luminaire luminous efficacy: | 93 lm/W |
